PintyCompact Tactical Red Laser Sight with Picatinny Mount Alan Wrenches for Hunting - Easy and Bright

Bare with me, I'm making a very serious point here. This is a very good product and maybe this will help you have an easy installation...because it is so simple, the manufacturer didn't send instructions.The accessories that are out nowadays are a THIRD of the size of the same accessories, from just a few years! Now, everything is scaled down, AND THEY WORK BETTER!. I swapped out my very finicky Simmons high percussion scope; that thing would get knocked off if you so much SNEEZED on it!! I replaced it with a quality, tough little Quick Reflex Scope, DANG! What a difference that made.BUT, I had to get rid of the cumbersome old laser too. I didn't have room on this carbine to put it on, without looking junky again.So, when I was looking for a laser, for some reason, I just kept coming back to this same little laser. Aluminium casting. All metal. It fit on my picatinny. And the little --click-on, click-off-- switch worked perfectly. It mounted in a place near my thumb:You will have MUCH MUCH better results if you put this laser on the top rail, or the bottom rail. If you try to SIDE MOUNT this laser, it will not zero in right. It's very important to keep it inline with your rifles barrel...IMPORTANT: The two small set screws in the front of the laser? IT IS VERY IMPORTANT to turn ONE SET SCREW STRAIGHT UP, and the other set screw STRAIGHT OUT TO THE SIDE! SO, when you adjust it, it will be --just a bit up or down...and the sideways set screw will be just a tad left, or right. You see what I mean? If you just put this thing on any old way, and the set screws are off horizontally AND vertically, your going to be very frustrated as you try to "zig and zag" around. Aggravating as hell! Think about that a minute. You set the laser so that it will adjust in a cross pattern, instead of a diagonal one...If ya need help, just leave a comment.EASY TO SET UP.!! Put batteries in, but before you turn it on, look at the tiny hole that the beam will be coming out of......Using the small allen wrench, get it as.close to center as you can. Put the laser site on the rail, JUST BARELY SNUG IT. It will be REALLY CLOSE BUT YOU'LL PROBABLY HAVE TO FINE TUNE IT. Then carefully tighten everything to stay. You may have to wiggle and tighten it up a few times, so it will settle properly. I have bought one of these for everything I've got. Works great on a pistol as well. I'm even thinking about trying one on my Long Bow.

I purchased the Pinty Compact Tactical Red Laser Sight from Amazon to use on my Daisy Powerline 426. It came in today about 4:30 pm. Was on time and in great shape. No instructions but not a problem, easy to mount. Fits great and looks great. It is easy to sight in. I really didn't do a great job of sighting it in. I just want to see at 10 yards on 8 inch paper plate with two splash targets how close i got it sighted in. After a couple of adjustments i got it to where i was having fun. Tomorrow i'll fine tune the accuracy for a better pattern. Installing the battery was easy, but the back contact spring that pushes the batteries did not put enough pressure on the batteries so they kind of wobbled inside the holder. So on some of the shots there was not good contact and the laser light would cut of. I took the back spring and stretched it very carefully to give it more length and that solved that problem. I gave this product a 5 because the price 19.99 with the 3 batteries and wrenches was a great. I did make a minor adjustment to the battery spring, but not enough to take away a star. This Laser is just right for my pistol and i would recommend it to anyone who is looking for a good pistol laser at a great price. I attached some pictures.

Great product as it will attach to the rail on my shot gun, pistol, or the cross bow I bought from Amazon. Only things I don't like is no matter how tight you tighten it down it still loosens up on the rail system and needs to be retightened. And on mine if I tighten up the end where the button is all the way it cuts it off. I have to be very precise as to where I tighten it up to to have it still work. But awesome laser light

Fit and accurate.

Edit:Just days after I posted my review, the seller offered to send me a new laser sight completely free of charge, and I didn't even have to send the old one back. My new sight seems to be working without any problems so far, and since the seller was very generous and quick to respond, I will raise my review from 3 stars to 5 stars.Original Review:I bought this laser sight for an airsoft gun I bought couple weeks back and so far it's worked fairly well. It shines brighter than the laser in my SAMLITE flashlight and is still visible over 100 feet out when it's dark outside. Adjusting the sight was easy to figure out despite the fact that it didn't come with any instructions. One issue I've noticed is that the laser gets dim to the point where it's not even visible past a couple of feet if it gets too cold. I noticed this right out of the box since it was below freezing on the day it was delivered and again when I used it outside a week later when it was around 20 degrees Fahrenheit. Overall, this is a decent sight for airsoft guns or anything else that has little to no recoil as long as you don't use it in cold weather.

It’s a pretty good laser like it goes far and it gives you all the things you need and the price is good but the only problem is that you can’t adjust it to line up with the sights so it’s just a normal laser that goes straight with the gun so basically where you aim depending on where it is (mines on the bottom), anywhere I aim I shoot above it.

When I ordered This "Laser Sight" for my air rifle, I was hoping it would do better than the laser sights that they advertise on other sites. The reason being is that I needed one that mounted on a 45° picatinny rail. In other words I needed one where I can rotate the laser so that the elevation and windage would be in the upright position. Well, This laser sight was able to do that. It had a set screw which held the cylindrical laser in place. When you loosen this set screw you are able to rotate the laser to your desired position.

It didn’t work so I couldn’t tell you if the product is a good buy or not. I thought it might have been the batteries but I ordered new ones and it still didn’t work. Be careful if you plan to buy this product.