Epoxy Putty White 227g/8oz, 2 Part High-Strength Underwater Repair Putty | Waterproof sculpting clay bonds Metal, Ceramic, Plastic, Wood, Tile & Concrete; fixes Pool Leaks, Cracks & Holes for plumbing

My free standing water feature blew over in the recent strong winds and a piece broke off which was very noticeable. As the fountain was a mottled grey this worked well and was very easy to mold into the desired shape. It did take while to mix the 2 parts together. Adhered well and just needed a stippling of grey paint to blend it in.

Easy to use and did the job on filling gaps in wooden door frames. No problem sanding down after it had set.

Good stuff

Does what it says on the box

I applied Bostik All Purpose Adhesive to seal two water butts. While it adhered well to one, it didn't bond effectively with the other, leading to some leakage. The adhesive worked fine on the first but was less reliable on the second, possibly due to surface differences or environmental factors. Overall, it performed adequately on one but didn't meet expectations on the other.

Used this to fix my bird bath after it cracked from the water freezing. Fairly easy to use but the gloves provided aren't the best, I used latex ones. I dabbed my fingers in water and smoothed out the putty for a better finish. Waited 24 hours, at least, to let it dry. It's holding very well. The left over putty I wrapped in cling film to preserve and avoid drying out for further use.

Failed miserably, not easy to work with. Returned

I used this for making a cradle moulded to a power tool in a jig. I mixed it thoroughly 50:50. It was perfectly plastic for at least the 15 minutes I needed to shape it in place. I left it 24 hours and it is now solid. It did exactly what I wanted and performed as I expected it to.

Je l'ai acheté pour une réparation de baignoire et j'aurais dû l'acheter plutôt ! J'avais d'abord acheté une autre pâte epoxy double composant qui sort de deux tubes en même temps... Pour mon usage c'était une catastrophe ! J'ai donc rattrapé le coup avec cette pâte à modeler avec laquelle il est beaucoup plus facile de travailler ! Ça se ponce assez bien avec de l'huile de coude bien sûr...

Ottimo,rimasto di stucco

Hochwertig und funktional. Sehr zu empfehlen. Lässt sich gut verstauen. Die Bürsten sind relativ weich, der Scharber ist sehr praktisch.

Super pour ajuster une pièce imprimée ou bouché un trou, le mélange des deux pâtes est simple à réaliser, au bout de 24h la pièce est prête au ponçage pour ajustage. Facile a poncer (mais attention à la poussière). Par contre les gants fournis sont inutiles, beaucoup trop fins et mal ajuster.

blijft zacht, na 5 dagen nog steeds zacht niet uitgehard