Foose Custom Cookie Cutter Maker 10ft x 1in Coil Tin-Plated Steel – Make Your Own - Strip Roll DIY Cookie Cutter Kit – Food Safe USA Made

I am a huge fan of these diy cookie cutter kits. I keep buying them so I have them in hand at all times. Since starting my cookie decorating endeavor in January, I originally went crazy purchasing cookie cutters. Not cheap! So fast forward to me finding these on Amazon. The material is sturdy, easy to manipulate, & has a decent amount (obviously the number of cutters the roll will yield depends on size of each cutter, but I made 9 from my first roll). There is a slight learning curve w/ regard to how much you need to cute to complete a cutter, but overall the kit is a VERY economical way to make custom cookie cutters that I design or to replicate designs I see on Etsy for $6+ Definitely need to be cautious when using/cutting the material and while it does include double-sided tape, it’s not a lot. Also, be mindful of orientation when making the cutter so that the deign is situated the way you want it when it’s in the face down cutting position. When putting together your cookie cutter making kit, in addition to this kit please have needle nose pliers, gloves (I haven’t used gloves, but it’s probably the right thing to do), and clamps to hold the taped ends together, and possibly additional tape.

I wish I would have tried this sooner.. Could not find any PRIMITIVE cookie cutters so I thought I would try my luck at making some myself.. Turning out pretty good, so I just bought two more rolls..

It is easy enough to bend while still keeping its shape when you cut dough. I would recommend using needle-nose pliers for sharper angles

The metal blade is perfect, and exactly as advertised. The 3m sticker pads that they provide to hold the product in shape are not. For one, they don't hold up with any kind of oily cookie dough (I was using gingerbread). Fortunately, the metal, once shaped, stayed in place on its own, so I still give this 4/5

Great for making your own cookie cutters! I’m a pottery artist and this was great for exact unique shapes I wanted to use on clay. I used trim cutters to cut this and it worked out with some force and bending back and forth. Then jewelry pliers helped shape them. I like the sticky glue part too that it came with. I used a little longer pieces to wrap around the sharp edges at the end and it’s perfect.

A pair of tin snips cut through the material like butter and the steel is very sturdy. It can handle the manipulation of free-form shaping. I didn't have any issues with it crimping when I didn't want it to or snapping off. Really pleased with the product and looking forward to making more cutters for my projects!

I was super excited to make my own cookie cutter fro this design that I wanted to emulate. So with sketch paper in hand I set out to complete my task. First off I learned quickly that I needed something heavier then a sheet of paper to form the cookie cutter from. Next the sturdiness of the stainless was just about impossible to form especially if you have close angles to form. If the material was just a little more flexible I would of spent less time and made different shapes as well. In the end I was successful and will make an amazing holiday Santa

I had an idea to do an edible puzzle, and set out to make nine cookie cutters that would yield cookies that could be put together. After the first two cutters, I realized that worrying about a perfect form was adding too much stress, and ultimately my friend and I picked several pieces from a colorful puzzle, and used them for inspiration! I love that the cutters, and therefore the cookies, look more like random cut puzzle pieces than commercial cutters. If you are starting out, my recommendation is to buy wire bending pliers made for crafting. They are nylon covered and are less likely to damage the tin. I made the overlap about 1/2 inch, and put just a thin strip of the enclosed tape towards the rolled edge of the cutter, pressing it together with the pliers. This leaves a very small gap on the cutting edge, but I found it easier to fet soap and water into the crevice this way. Oh - and thin cheap work gloves help a ton! I’m absolutely hooked, and will try again to make the edible puzzle, and I’m sure many other shapes! I already ordered more. :)

I have made 2 cutters so far (the leaf and the sign in the photo attached) and for the first time doing so, I think it worked well. Follow guides on youtube if you’re not sure how to do it, but using some plyers will help get the corners nice and sharp. One edge is folded over so it won’t hurt your hands when you use the cutter. Ive just washed them by hand, so not sure how they’d do in a dishwasher. I have made 2 so far, and could probably make another 3-4. Will likely buy again.