PC Products PC-Super Epoxy Adhesive Paste Kit, Two-Part with 50ml Cartridge and PPM-50 Dispensing Gun, Translucent 588

This is my new go to product for many repairs. The use of the syringes to dispense the material means I never have any product that is wasted by one of those old style tin tubes. I can easily measure out the exact proportions of hardner and resin so that the epoxy sets up perfectly every time. While it is a little more expensive, I have had zero waste, since I started using PC Super Epoxy. I recently used it on the wood floor 2x4 framing for a small shed. The outside of the 2x4 had become checked and cracked after 30 years exposed to the weather. I sanded down the 2x4 and cleaned up any loose pieces of wood fiber. I mixed up, in back to back applications, several syringes of PC Super Epoxy and coated the exposed surface of the 2x4. The PC Super Epoxy went on smoother and stayed where I put it far better than the other very popular name brand (JB Weld). I had already tried to do the same job in another section with JB Weld and it was hard to apply and get to stay in place and therefore it looked sloppy and did not have a good finish. The PC Super Epoxy works like no other epoxy I have ever used. It did not sag or run but instead clung to the wood and made a smooth seamless surface. After it hardened, I sanded it lightly and finished with primer and paint and it looked better then new. This product is amazing and i have used it several repairs and really love the results achieved.

Easy to use and thick enough to prevent sags and drips (unless you go crazy with the amount used). Press the pieces together for a few seconds and walk away-they will not move out of position.

Good product. Easy to dispense and mix. Sets up well. Looks like a solid bond.

The description of this product should include that you need a special dispensing gun that costs approx. $60..

Funciona muy bien, lo utilice para pegar una bisagra de hierro a una puerta de madera que estaba rota, y funcionó muy bien, lo único que sin el dispositivo para sacar el pegamento es un poco difícil sacarlo del envase, aun así funcionó.

I followed the YouTube video instructions for using this to repair swim fins using a fiberglass patch. The fiberglass patch failed miserably and honestly I was skeptical of the recommendation to use fiberglass near skin in the first place. I was able to easily peel off the fiberglass patches. Next I buffed the surface and reapplied the epoxy without the patch. Using it without the patch seems to have made a much stronger and better repair. Only time will tell as I have to wait another week for the pool to reopen and I can test the fin repair in the pool. I only gave 3 stars as I can’t test the repair just yet.Denatured alcohol was recommended in the video but I did not have that. I used isopropyl instead which may have weakened the bond of the first patch. I definitely suggest having isopropyl handy to get this off the skin or any other surface area before it dries.

Probably one of the best glue/epoxies I've used over the past 30 years of extensive DIY work. Just the right blend of stickiness, non droop, and workability when applying. No way is this "clear" though. Definately dries to a milky white. I used this to epoxy in place iron balusters into a drilled wooden handrail on top and a base strip on the bottom. Was perfect for that application because there was very little drooping/running from the top holes. Dries HARD and I pity the person who ever has to remove these balusters in some renovation in the distant future.

This was perfect for fixing a small piece of baseboard and the metal on my stair railing. I would purchase this again. I like that it has a lid and can be saved and used again for a later project or repair.

Good product but after several uses the nozzles became clogged and it was difficult to squeeze out equal amounts of the resin and hardener.

Did the job

i've used quite a few different epoxy glues in my career. this one is one of the nicer ones. right away, impressed with the dispensing syringe. not cheap like most others and a great seal. The glue dries hard, but if left in water, will soften.

Good strong epoxy. The 15min work time might be a little generous, it starts to get very thick and viscous after about 10 min, at 15 min you better be done spreading it where you want it to go. This can also depend on the ambient temperature. I have used other PC epoxies and they all have performed very well.

Works well with other epoxy cartridges too. Other than a bit of waste epoxy and syringe tip, this is probably the fastest way to epoxy anything. Be sure to shop around to get extra tips. You do not need the super long tips like the ones pictured here for proper mixing, the shorter green tips work just fine.