PRECUT Hard top Window USA Distressed Flag Decals Stickers to fit Jeep Wrangler 2011-2018 (JKU 4door Both Sides)

I was happy that the decals came in a nice solid shipping tube. The decals looked and felt high quality. Then I noticed there is one half sheet for instructions and it says professional installation required. I don’t recall seeing that when ordering, so I felt a little mislead.I’ve never installed a decal like this and I was hoping for more than the minimal instructions provided. I tried going to the sellers site and to YouTube and could not find any installation videos or any more installation instructions. But I decided I give this a shot.My first mistake was that I didn’t know which was the backing paper and which was the transfer tape. If you don’t already know, you should know the backing paper is the white sheet and that’s what you peel off first and that leaves the decal on the somewhat see through transfer tape that will stick to the glass.Generally I followed the instructions and put tape down the middle of the decal and did half the decal at a time. I did decide to cut the decal prior to pealing the tape because I was worried about it moving while I tried to cut it. I also felt more comfortable that the decal would be properly aligned and would not have to worry about the excess flopping around.I think installation and the final outcome would be nicer if the decal was an exact fit for the windows. The leading edges of the stripes will have soft corners and not be on the leading edge of the glass, but if you simply trim the trailing edge of the decal at the glass edge, those will be straight cuts and not mirror the leading edge of the decal. Most people probably won’t notice that, but you as the owner/installer might.I’m happy with the final installation. The decals look great and everyone who comments on them like them. I just wished the decal was custom fit for the window and a little more detailed instructions were available, or to indicate on Amazon that professional installation is required.

You either need a little experience with these prior to installing or you need to get it done professionally. These look awesome if done correctly. I honestly love them, but I HATED installing. Thank god my hasband has a little experience with these before. We still ended up tearing one of the stripes (see photo) and it’s not bad when you back up to look at it, but I still know it’s there.Thankfully the adhesion is pretty strong. We installed half of the first on crooked the first try and had to pull it back off and try again. Almost everything stuck to the white paper still and it looks just fine. I’m not going to attempt to give directions on how to do it. We did it 2 different ways. The second time was easier, but that’s when the tear happened. The first time was harder and there were some swear words thrown around, but there were little to no tears.... so whatever. They’re nice if done correctly and they’re cheaper than most, but good lord they’re difficult to install.

I almost want to take a star off due to the fact when I first peeled the clear overlay up, the decal stuck to the white backing. The fix was easy, but some folks wouldn't have a clue. I used a decal tool, a credit card would work as well, and just rubbed the entire clear overlay and it helped adhere to the decal. 1 of the stars didn't transfer, but I was able to peel off the backing and stick it where it belonged. All in all, 5-10 min per side and you'll need a razor blade to trim the excess length on the stripes. Once applied, use the tool to rub vigorously to ensure the decal is stuck to the window nicely. Pull the clear transfer film at a sharp angle, slowly. It's so easy and looks sick. I'm very happy.

Ordered this a few months ago and couldn't get to it till recently the decal stuck to the wrong side so was tedious to get them to were they should be with the sticky side up on the backing, so I could place it on my window but the backing isn't strong enough to hold each individual section (I started with the stars) and they were coming off getting stuck to me as I was trying to peel the front off. Finally I gave up, not worth the hassle. Will never buy from again. I tried to contact seller but I have been ignored.

I tried 1 window using the directions with getting the surface wet first and the other without doing that and just trying to align it. I will say that wetting it made it easy to move around and get bubbles out easier but it was a lot harder to get it all to transfer and to actually stick so let’s hope it doesn’t come off going down the road or at the car wash. The other side without getting wet did have a lot more imperfections I couldn’t get all smoothed out but transferred a lot easier and was by far was what I should have went with. Having another set of hands was a big help. All in all the few wrinkles or bubbles that are left are not a big deal at all since it’s a distressed flag there aren’t straight lines to worry about and looks great. As long as it sticks and holds up I’m very satisfied!

I love the looks of this decal. The installation was what should be expected from a large decal. One thing to note though is surface prep is everything, the window has to be clean. I would highly suggest to watch some YouTube videos on installing decals… There’s a lot more to doing it then the provided instructions. The instructions says to wait till it’s dry to remove the film. That is a must, I installed it in a 72° garage and did not peel the final film off until six hours later. Only gave this three stars because there is quite a bit of trimming that needs to be done. Jeeps have a known dimension on the back window and I think the company cut corners by not cutting it to fit. Would I purchase this again? Yes

The vinyl was cut perfectly and very professionally done. As mentioned in previous reviews, the flag had to be trimmed slightly on both sides to fit the rear windows on my 2012 JKUR, but once trimmed, it was a perfect fit. The flags look amazing on the jeep!! The flag looks weathered and the vinyl has a flat Matte finish, exactly as advertised.The vinyl was shipped quickly to the house in a protective tube and arrived undamaged and ready to install. Nice work, Skull Daddy!