Best Choice ProductsOutdoor Hanging Curved Steel Chaise Lounge Chair Swing w/Built-in Pillow and Removable Canopy - Yellow

This is one of the easiest products to assemble that I've encountered. Parts are all vacuum packed and identified and it includes the 2 hex wrenches needed. If assembling on a deck, make sure you lay down a ground cloth so no parts fall down between the boards. (Yep. That happened.) You do need 2 people to assemble it (1person could do it but thats asking for frustration). There are complaints about the cushions retaining water. They can get a little waterlogged but toweling the excess and hanging to dry solves that. Cushions are easy to remove and replace. I use a giant sized garbage bag to cover the cushions, slipped right over the longue, and secured w a brick, and that works nicely. I've had back and hip problems and this longue is a dream for that. I keep thinking, where has this been all my life?

This chair is even more comfortable than I imagined it would be - and I imagined it would be really comfortable! It's sturdy and fairly easy to put together, even as a single woman. I took another reviewer's advice to partially assemble the chair (only the first 3 pieces) and then mount it to the support frame, before continuing with the assembly. I'll also add that it's easiest to put the arms on last, after you've attached the seat canvas to the chair frame. I'm really happy with this purchase!

I bought this as a gift for my wife. She loves it.The item is pretty sturdy. The frame is made of powder coated steel of adequate gauge, as is the seat. Assembly is mostly through-bolts. The exception being the canopy which is assembled with sheet metal screws.I assembled it myself in about 2 hours except threading the rope which my wife helped with.Overall, I am very happy with the purchase. I would give 4-1/2 stars if that were an option. I would recommend it with a couple of minor caveats. See nitpicks.I have a couple of nitpicks:1. Though I found them adequate, the instructions are a bit sparse. A bit more text might save a little time.2. The welded nuts that secure the seat front had a burr that prevented inserting the tube. A couple of minutes with a metal file solved the issue.3. One of the arms for the canopy was not assembled correctly and came apart. Again, a simple fix: I needed to unscrew the screw that should have gone through the eye and reassemble correctly.4. The rope for supporting the webbing could be a bit longer, to accommodate tying several knots as recommended by the instructions.5. The screw that holds the canopy to the backet was not screwed in to the hole for it. I solved this by replacing the screw with a slightly larger [thicker] one.Tips:One reviewer indicated that some of the holes did not line up and he had to drill new ones. I did not have this issue. However, I did find it necessary when assembling the seat, to leave the 4 bolts that attach the 3 lower parts loose until the all the bolts are in place. This gives you the ability to properly align the parts.One reviewer indicated that the seat was too heavy for one person to lift into place once assembled. I deviated a little from the instructions by hanging seat frame immediately after assembling the top parts (with the "8" hook between them). Not only was it lighter and easier to lift that way, it made getting the bolt holes for the bottom parts and weaving the rope that supports the netting easier.While it would be quite possible for one person to weave the rope, we found that doing it as a team of 2 was easier and quite a bit faster. We started on the bottom in the center and worked up each side, finishing at the top center. This was not only faster, but made it easier to get the webbing properly centered.When attaching the canvas to the canopy, place the bracket so it is on an angle (not perfectly horizontal) and put the outside arms forward. Then attach front corners first, making gravity your friend rather than your enemy. I found it handy to use a small step ladder for this step.I do highly recommend paying attention to the instructions' advice on climbing into the seat. Do so from the side not the front. Tring to enter the seat from the front will place the center of gravity in the wrong place and could cause the otherwise very sturdy hammock to tip.Some reviewers have complained about rust. As I mentioned all of the frame pieces are powder coated and very tight fitting caps are provided for the ends. So the only parts that would seem to me to be susceptible to rust would be the hardware (nuts, bolts). If i experience, this issue I will solve it by replacing the hardware with stainless components from my local big box hardware store (Lowe's/Home Depot, etc.) To that end, you might want to save, the card the hardware is attached to or record the bolt sizes that are written on it.

Overall great! but... two things: the metal rods kept coming off from the wind blowing the canopy. We had to go buy longer screws so they wouldn't (hopefully) pop out when the wind blows the canopy and the center case that holds them expands. Also, the black metal frame gets so hot, it can burn you. It would be nice if the cushion was wide enough to give some cover over the frame.

The media could not be loaded. My title says it all! Look no further for any outdoor furniture needs, especially if you like hammocks and have no trees! I’m a single woman, so please know that this is quality metal or STEEL that this cantilever style swing is made of and it’s quite heavy when assembling it. I purchased two Keter Folding Table Workbenches on Amazon because it’s projects season galore for me! They really came in handy as I put this swing together alone.It’s really easy to assemble but again it’s kind of heavy because it’s thick and great quality steel! Best Choice Products (BCP) has a plethora of colors for you to choose from! I chose gray over black or white for dust showing reasons. Also, my house is gray and of course they did not include touch-up paint in the box and I have plenty of gray paint! BCP….INCLUDE TOUCH-UP PAINT WITH YOUR PRODUCTS…..but you all still get five-stars!I’m 5’5.5” inches tall and the top of the swing handle towers over me. The dimensions say it’s 78 inches high. It’s super comfortable and has a max weight of 265 pounds. You have to just trust that you’re not going to hit the ground due to it collapsing unless you exceed the max weight limit! This swing is truly SOLID!I ordered a twin size vinyl sheet from Amazon so that I can just cover up the chaise and take a quick Power Nap during outside work projects. I can’t speak on foldability because there’s no reason to ever fold it! I believe wherever you put it you’ll leave it because it’s sturdily heavy! I assembled it on my covered patio and I’m loving it!I love working in my beautiful yard or just tinkering or grinding on projects. This is definitely worth the price and it’s some of the best money I’ve spent on Amazon! I spend lots of it here! Buy this chaise swing chair! You won’t regret it! Warning: if you have a large family then buy MULTIPLES of these swings! You all will be fighting over who lounges in it guaranteed if you don’t! Now….bye!