Generic Diy Co2 Aquarium Plant System

The media could not be loaded.  The kit works flawless. Just follow the instructions which comes along with the package. It will work fine. This is mainly for co2 generation from baking soda and citric acid powder. Initially i was worried if the valve adjustment will be week / not accurate for bubble adjustment. But valve is also working fine... with great quality build. If anyone has doubt how to move the pressure needle to gren zone... it moves as you squeeze initially... you loosen some co2 and squeeze again... repeat untill the needle is in greenzone... which is better (but anyways i am not maintaining it in green zone just 0.5 mark, but it still works fine. Also there is a magnet attached to the needle indicator. you can take it and move the citric asid absorbtion ball that is in the bottom of bottle cap A. I figured it out later after seeing a youtube video. Anyways that is not too necessary.... I am very much happy with this product... Sidenote: you have to purchase diffiser kit and bubble counter seperately though. Those do not come along with the kit....... Enjoy your planted tank.. ill come back and let you know how long the mixture lasts for 1 drop/second (that is what i set for my tank)

Nice packing. Contains all the mentioned parts. ( Diffuser and bubble counter are not included. Good quality. Will update after using it.Update: working till now. But the screw is a bit worn out due to the pressure.

It's a good buy if you are starting out with CO2 and want to experiment. I recommend buying an aluminium needle valve separately as this one is quite bad. The connectors, caps and tubes are excellent though and it works very well. If you are new to this, do keep a regular eye on the pressure valve as the pressure will never stay consistent in any DIY set up. Not really a problem if you are regularly monitoring

Wasteful expenditure. I have used it for almost one month. First the solution lasted for 3-4 days only. There was an answered question that this happens because of leakage. I sealed all joints and checked with soap solution as suggested. No leak noticed. Even thereafter the solution lasted for 2-3 days only. This means leak is not the reason for the entire acid transfering to the baking soda fast. It is faulty design. I am not the only one who has faced this problem. My conclusion is that this is outright cheating. This product should be avoided because one kg each baking powder and citric acid cost about Rs. 500 which gives CO2 for 3-4 days only. The process is messy. One should try CO2 cylinder instead.I find similar product selling on Amazon for different prices upto Rs. 5000. Although I have not tried them, I think they wont be any better.

Product is very good, even regulator is also working well. There is no leakage at all. but its too costly. Frankly speaking this product is not worth more than 700-800. Defuser , bubble-counter and check-valve is not included with this. You will have to buy all this separately. So u can imaging how much will be the total price of entire setup. I dont think anyone will consider it as DIY if you will be paying 3000 or more for this so called DIY setup.I think if we can get few nozels which can be fitted on the soft-drink bottle by making hole , that will be too cheap and actual DIY product. Because DIY things meant to be cheap

Good packing. Average build quality. The pack comes with a fine regulator and a cut off valve. The contraption works best if you connect the valve first and the regulator on series from the bottle. Or else the fine regulator doesn't seem to work properly.

One of the best and cost effective CO2 generator system, best quality product but the needle valve is bit hard to tighten and sometimes gets tedious job to control the CO2 produced. Apart from the needle valve everything is perfectly described in the manual. Comes in a sealed packed cardboard box. A very good DIY experience. We see a significant growth in the plant with this system, when CO2 is diffused in the Aquarium.

The media could not be loaded.  For people who like doing DIY, its a good product. Preparation isnt a big hustle. Product is twice as expensive for the components used.Wish the seller sells the valves, caps and pressure gauge seperately