ARCTIC Liquid Freezer III Pro 360 - AIO CPU Cooler,3 x 120 mm Water Cooling

I purchased the ARCTIC Liquid Freezer III Pro 360 in July for under $70 and paired it with an AMD Ryzen 7 9800X3D on an MSI PRO X870E-P WiFi motherboard. After roughly two months of use, I’ve been very happy with its performance.Installation was straightforward, and everything needed for the AM5 platform was included. The mounting hardware felt secure, and once installed, the cooler has required no adjustments or maintenance.Cooling performance has exceeded my expectations. My Ryzen 7 9800X3D typically idles between 37°C and 46°C, and during sustained 100% CPU stress tests, temperatures remain between 64°C and 70°C. During normal gaming, temperatures stay comfortably below those values, leaving plenty of thermal headroom while maintaining consistent performance.Another thing I appreciate is the overall noise level. The fans and pump remain quiet during everyday use and only become noticeable under heavier workloads, without sounding excessive or distracting.Considering the performance, build quality, and included hardware, it’s difficult to find a better value at this price point. For under $70, this cooler delivers exactly what I was looking for. It keeps my 9800X3D cool under load, runs quietly, and has been completely reliable since installation. I would absolutely purchase it again.

Works great and keep my cpu at a good temp, even when running demanding games like BF6, Cyberpunk and other MMO titles that I play, honestly I have all my fans arctic and the aio as well. Easy use and install, it fit great on my case and the compatible with my build. Can't go wrong with Arctic,this is my number 1 for pc parts over any other brand. Product is perfect, quality is great, installing it's products are easy for me, love the colors that I've bought and the prices for the parts are budget friendly for me. I'd recommend Arctic products to anyone. Arctic will be my personal go-to pc parts for me and I'm a PC builder. Great work Arctic!

I had thrown this baby into an ASUS prime 201 and it fit beautifully! It’s slim, sleek design and magnetic vrm cooler makes it even better. The fans do get a little noisy at 3000rpm however you don’t really need them that high. Installation was fairly easy, you just have to keep the left and right brackets a little loose. The all in one cable also came in really handy. For $80, performs way better than my nzxt lcd. You cannot complain about the price!

Just installed this on my first and new pc build and haven’t had a whole lot of time really using it. So my 1st impression is mostly positive.Pros- Does a good job at keeping the CPU cool. I’m using the AMD Ryzen 7 9800X3D and so far keeps it cool. At idle the temperature hovers between 34 and 40C. Great quality for the price. I like the sleek black fans and cleanliness it gives my PC. It feels rugged and well built and looks like it’ll be a very durable addition to my PC.Cons- it’s a bit loud even when at idle so be aware if you need your PC to be quieter. The instructions could have been written a little more strait forward. I had to do some YouTubing to figure out on how to instal it. This was the most frustrating part of my PC build. I had to really finagle to get the radiator and fans mounted to the tower (doubtless check to make sure it fits your setup). Even though the hoses are stiff and seam to be well built, it does make it harder to mount to the cpu.Overall I’m happy at the moment and I plan to make an update once I really start gaming on it.

The ARCTIC Liquid Freezer III Pro 360 lands squarely in “gamer-approved beast mode” territory — it’s one of the strongest-performing AIOs on the market right now, especially for high‑wattage CPUs. Across multiple professional reviews, it consistently punches above its price class with standout thermals, strong fans, and clever engineering.🔥 What Makes It a Gamer’s Cooler• Top‑tier cooling performance — Reviewers repeatedly highlight its exceptional thermal performance, thanks to the thick radiator, high‑pressure P12 Pro fans, and integrated VRM fan. It excels in both noise‑normalized and max‑speed tests, keeping even the hottest CPUs in check.• Built for modern high‑end CPUs — It’s praised as one of the best coolers for chips like the Ryzen 9950X3D and high‑draw Intel processors, delivering chart‑topping results at a surprisingly reasonable price.• Gamer‑friendly design — Hidden cables, long tubing, and a clean aesthetic make it easy to build with and perfect for RGB‑leaning setups. PC Gamer calls it “the new AIO to buy.”• Quiet until you push it — At normal loads, it stays impressively quiet. At max fan speed, it gets loud — but that’s expected for a performance‑first cooler.🎮 Real‑World Gaming Experience• High FPS stability — Lower CPU temps mean fewer thermal spikes, smoother boost clocks, and more consistent frame pacing in CPU‑heavy titles.• Great for overclockers — The integrated VRM fan helps keep motherboard temps under control during long gaming or stress sessions.• No‑nonsense installation — Native offset mounting for Intel and AMD helps center the cold plate over the CPU hotspot for better heat transfer.🧊 Quick Gamer VerdictIf you’re building a high‑end rig or pushing a power‑hungry CPU, th

So for those that do not want to read the review, I'll just say it is an excellent CPU water cooler, and a must if you have a higher end CPU that likes to run hot.Now for those that want to read more, here's my review:Before I start with the details, I definitely need to stress that is imperative that you measure your case before purchasing this CPU cooler, since the manufacturer isn't lying, it requires a lot of space. That being said, if you have a case that can handle it, it works great and keeps the CPU nice and cool.Okay so on to the review. The reason I purchased the Artic Liquid Freezer 3 Pro is after building a new system with an Intel Core I9 processor, I found that the CPU cooler I purchased for it (Cooler Master 120L) wasn't really rated for such a powerful CPU, and under load the CPU temp was hitting 85c. Now 85c isn't a killer if it's just a quick spike, but when doing video encoding it was hitting and staying at that temp, which just isn't good for the CPU. So doing a little more research, I saw that Artic Liquid Freezer 3 Pro got great reviews, and was recommended for high end processors like the I9.Installing the Artic 3 Pro is extremely easy, unfortunately I built the system in a smaller full size tower case, and the new CPU cooler wouldn't fit the chassis. Luckily my secondary machine was in an even bigger chassis, and it turns out it had mounting holes and rubber grommets already there to mount the Artic 3 Pro. So after stripping the 2 systems bare and swapping all of the components, booted up the new system with the Artic 3 Pro and checked the temps, and my basic idle temp is 26-28c, a good 10 degrees lower than the idle with the old water cooler. I haven't had a chance to stress it out with some video encoding yet, but I've already noticed that the heat spikes I was seeing previously seem to be gone.So in summary, I love the new CPU water cooler! I did run across one issue that had me worried when I first booted it up, and that was that there was a constant low humming noise that seemed to be coming from the unit. I'd read a couple of other people comments saying there was a low hum, but I figured it was a one off for them. Of course I like my rigs to be as quiet as possible, and since the PC sits right under my desk I knew this was going to drive me nuts. Luckily I was able to figure out the problem, which was the tubes from the CPU to the radiator are long and stiff enough that they were touching the side panel, and the humming sound was the noise from the liquid moving and being amplified by the metal door. Fixed this issue with a few zip ties to move the tubes slightly inward so they didn't contact the door, and now the system is as quiet as can be.I hope this review has been helpful, cheers.

Great CPU cooler. Dropped my computer’s idle temp to 32* with a maximum temp of 86* during stress test. (I have an i7-14900 that would thermal throttle at 100* during stress test with air cooling). Fans and pump on max aren’t that loud. Majority of the time it is silent. Amazing product for the price, plus no RGB lights, which is rare with pc parts and fans these days.

Works well once installed. The install was a bit tricky.It's really hard to get the spring-loaded, water block screws into the AMD CPU bracket. Alignment was a little off and felt like I was going to break my CPU/MB. I finally figured out that you can loosen the top screws of the right and left brackets to give them a bit more wiggle room to get the waterblock screws started, then tighten everything down a little at a time.I planned on putting it in the front of my case as an intake. It's set up for exhaust and I didn't notice until after install. Okay so I read the online directions and it says to flip the fans. Looks like intake/pull is the only option in the directions. Get it installed a second time. Now the fans are screaming loud. Hmmm did I break something? Return it to factory set up and the fan wining goes away. So looks like the fans don't like being in pull configuration so close to the radiator.Finally decide I need to just figure it out on my own since both options were unacceptable. Messed with it for a total of about 5hr installing it and unistalling until I was happy. I flipped the fans to the other side of the radiator and ran the fan mount screws through the case, fans, and into the rad. This was tricky to install but worked with stock screws.Now I am happy and my temps have dropped about 12C on a lightly OC'd 9800x3d in cinebench coming from an old Noctua NH-D15! A tiny bit louder but that can probably be tuned out with fan curves. Case is an old fractal design define S. Was able to mount the radiator tubes down with a asus prime 5080 in the way.

Se avete seguito l'evoluzione dei dissipatori AIO, sapete che Arctic è una garanzia, ma con questa serie III hanno superato se stessi. L'ho scelto per raffreddare il mio nuovo Intel Core Ultra 7 265K e i risultati sono semplicemente sbalorditivi per questa fascia di prezzo.​Una delle novità più interessanti è l'inclusione del contact frame specifico per il socket LGA 1851/1700. Invece del solito sistema a staffe, si sostituisce direttamente il meccanismo di ritenzione della scheda madre. L'installazione richiede un minimo di manualità in più, ma garantisce una pressione perfetta sul processore, eliminando i problemi di curvatura del chip. Sulla mia B860-Plus si monta perfettamente, anche se lo spazio intorno ai VRM è millimetrico.​Per quel che riguarda prestazioni termiche e silenziosità l'Arctic brilla. Mantiene l'Ultra 7 a temperature incredibili: in idle siamo sui 30°C e sotto carico pesante in rendering non ho mai visto la CPU superare i 75-78°C. Il radiatore da 360mm ha una massa radiante generosa e la ventolina dedicata sulla pompa non è solo marketing: aiuta davvero a tenere fresche le fasi di alimentazione della scheda madre, cosa fondamentale se non usate una top di gamma.​Il design è molto "industriale" e massiccio, deve piacere. Un enorme pro è la gestione dei cavi: le ventole sono già pre-cablate lungo i tubi e arrivano alla pompa, quindi avrete solo uno o due cavi da collegare alla scheda madre. Un paradiso per il cable management.​Cosa sapere prima di comprare:​- Spessore: Il radiatore è più spesso della media (38mm + ventole). Assicuratevi che il vostro case abbia spazio a sufficienza sul top, altrimenti rischiate che tocchi le RAM o i dissipatori della mobo (io ho dovuto tagliare un angolo dell'AIO per questo motivo)​- Tubi: Sono belli rigidi e di qualità, ma richiedono un po' di spazio per essere piegati correttamente.​Difficile trovare di meglio, anche spendendo il doppio. È potente, silenzioso e risolve alla radice i problemi di contatto dei nuovi processori Intel. Se avete spazio nel case, è la scelta definitiva per chi cerca prestazioni da workstation senza il rumore di una turbina.

تعامل ممتاز وصل بشكل سليم وكما توقعته شكرا للبائع وشكرا امازون

Viene con todo lo necesario para montarla, no necesitas nada adicional.Me gusta que hayan elegido una buena pasta termica para acompañarla en el paquete, ya que otras marcas suelen recortar en este sentido.Ruido hace, por supuesto que lo hace, son tres ventiladores, pero el precio es contenido. Hay ventiladores que con las mismas vueltas hacen menos ruido? Claro que si, pero te salen a 15/20 euros cada uno, aqui estás pagando 85 euros por todo.En cuanto a la refrigeracion en si, muy contento, mantiene mi 3800X a raya. Antes tenia un Cooler Master por aire, y se nota la diferencia.

رائع وسهل التركيب لقد انخفضت حرارت معالجي i9 13900k

購入より幾分か時間が経過しましたので詳細をば。【CPU】・Ryzen 9950X(SMT運用)PPT:240W～256WEDC:232A～248ATDC:162A~192A【Mobo】・ASUS TUF-GAMING B650E-Plus WifiCPU Loadline Calibration:Level2～Level3運用C-State Limitterの解除状態:AutoClock Stretch(Core/L3 Cache):DisabledSpread Spectrum:Disabled[VRM for CPU]レスポンス:UltraFastVRMスイッチ速度:450kHz(MAX)電力供給方式:Extreme(電圧バランス優先)電流上限:100%[VRM for SoC]VRMスイッチ速度:450kHz(MAX)電流上限:100%【今回使用したCPUグリス】・ARCTIC MX-7まず初めにファンの静音性についてですが流石に3000RPMまで行くと結構ｺﾞﾜｧｱｱｱｱｱｱｱっと音がしますね結構ビックリするくらいな音出して来るのでなれない人は不安に思うかも知れませんねただ、2200RPM台であれば他の360mmと比較したとしても結構静かなモンですまぁこちらは正直同社が発売しているP12 Proまんまなのでそちらのレビューを参照したほうが早いですね性能はもちろん良いです。では本題へ。まず9950Xを冷やしきれる、その時点でとても素晴らしいですデフォルトPBO状態はさることながらCPUに関して結構無茶な熱を加えるASUS製のMoboでもCPU電圧は1.456vPPTは256WTDCは192AEDCは240Aまで耐えてしまいます最高温度はCCD1の96.3度で限界である115度まで11度程マージンがあります。俺は溶損が嫌なので90℃でスロットルする設定でやってますが最高性能を発揮させたい方にはこちらか、場合によっては当製品の上位グレードである420mm版を購入すれば間違いないと断言しておきます。ちなみに上記のスペックシートに記入した最小値の方のPBO設定では最高温度がCCD1の91.3度でしたこちらもまずまずの成果ですスロットルが効くまでのタイムラグを減らしたいようであればマザーボードにあるプリセット回転数に+10%程盛ってやればほぼほぼ指定した温度と合致する形で温度を制限しにかかってくれます。おすすめのPBOでのTjmax値はやはりと言うべきか85℃。この設定であればほぼ間違いなく95度には到達しないので溶損から貴方のCPUを保護してくれるでしょう。なお、CPUクーラーとしては言わずもがなGPUクーラーとしてもポテンシャルは高いです。某ドイツのエンスージアストの方を筆頭に、まれに当製品をGPUクーラーとして扱う人も居る模様。全体的に素晴らしいですが、一つ難点が。取付が非常にしづらい…正直ここは改善して欲しいですね、マジで9950Xのヒートシンクにガリ傷はいっちゃいましたもんほんっとに締め付けが難しい今まで水冷ヘッド取り付けて慣れてる人間からしても難しいこればっかりは悪い点として言及せざるを得ないです…ですが、本当にクーラーとしてはいい製品なので-1を打ち消して★5評価にさせてもらいます。以下、温度の大まかな概要を記載し当レビューを終了とさせていただきます。また何かあれば追記いたします。【アイドル時】・Curve Optimizer無し:39.2℃(室温25度以上)・Curve Optimizer無し:38.8℃(エアコン有り、室温20度)・Curve Optimizer有り@平均-24mv:38.4℃(エアコン無し)・Curve Optimizer有り＠平均-24mv:36.8℃(エアコン有り)【低負荷時:目測の為バラツキあり】・CO無し:45℃～53.4℃・CO有り:41.4℃～49.6℃【中負荷時:目測の為バラツキあり】・CO無し:63.2℃～66.5℃・CO有り:58℃～63.8℃【高負荷時】・CO無し:78～96.3℃程度・CO有り:73～91.3℃程度【上記温度計測時のPBO/Tjmax/電圧各種指定値】※CPU温度に影響する物のみ記載・Tjmax:95℃・Boost Clock Override:+200MHz<CCD1:5950MHz><CCD2:5650MHz>・PBO Scalar:x2・電力制限:上記レビューの最上位に記載・VRM速度/フェーズ:利用出来る限界値/常時フルオン・ProcHot VRM Throttling:Enabled・Disable Peak Limitter:Disabled(つまり上限設定あり)・CPU voltage:Auto=Default Behavior for Auto Overcloking VID. AMD Official.・SoC voltage:1.135v実観測値1.120v～1.125v。±10mv～15mv。LLC設定:無。BIOS内項目が存在せず。・VDDG CCD Voltagemin:0.900vmax:0.960v・VDDG IOD Voltagemin:0.900vmax0.960v・CPU VDDIO:1.232v-1.280v(HWinfo読み)BIOS内指定値は1.200v～1.250v。1.4vは危険と判断。最高でも1.350vが妥当。プラスオフセットが強めなのでIODへの損害が予想される為。