need a laser module, for use in cutting .50", steel plate, slow rate, ok for application.. please advise.. thank you, mark.¡

CNC plasma is your best bet, more affordable and DIY options. Also can set the same table up for CNC Oxy/Fuel cutting as well. Even are options to swap out the plasma cutter for a router to carve and cut wood as well, some have digital hight control to cut uneven material like diamond plate or corrugated steel. And there are options for cutting pipe as well. Many people have made there own and yiu can buy units as small as 2'x2' table cut size or up to 4'x8' and even bigger than that. Some have nesting software that will arrange all of your cuts ro use the least amount of material. And say you have a 4'x4' table but need to cut a 4x8 or bigger sheet of steel, you can cut 4' then slide the steel so it can get the remaining 4 feet and so on. A plasma cutter than can cut 1/2" steel plate cleanly will not cost thst much but I personally would get something that can cut up to 3/4" (or even 7/8" to 1") cleanly. Do not get a machine that can barely do 1/2" or you will be cutting slow and maxing the machine out possibly using more consumables and not having a clean cut (if your looking at lasers I assume you want a clean cut, even by hand using guide steel to run up against I can produce some very clean plasma cuts and CNC can do even better). Dont look at the sever capacity only look at the clean cut capacity and get it slightly oversized. If you want a cleaner cut than CNC plasma can do and any dressing of the material after the cut isnt an option then if you can afford it look into waterjet tables over laser. A benefit of waterjet over plasma is not having thr heat that is associated with cnc plasma or CNC oxy/fuel. I have used hand crank devices that attach to large well casing via a chain and you jabe an adjustable oxy/fuel torch head. You line it up have the large 24" or 30" casing on rollers and you slowly rotate the handle to roll the torch around while rotating the casing in rollers and with this I have seen very impressive smooth and beveled cuts. So CNC plasma will suffice for 90% or more of people out there!

I cannot find any documentation on this module. Does it need a laser driver? Do you have any links to documents or recommendations?

Hi friend, Thanks for your question. Please send us the control board of your laser machine directly and contact us. We will give you the appropriate connection. The reason different customers have different control board and operation software,so it may have some different operation mode ,we can not give a same manual. Hope you can understand. Have a good day!

Can I attach to Twotrees ts-55 engraving machine?

Yes, you can attach it to Twotrees ts-55 engraving machine

Desertcart Logo

Deliver to Philippines

For best experience Get the App

DOWNLOAD THE APP

WE SOURCE ITEMS FROM

UAE
UK
India
USA
Japan
KOREA

Customer Services

About Us

Customer Support

Description

🔵 Cut Above the Rest: Precision Laser Crafting for the Modern Maker

PLUG PLAY READY - Compact, lightweight design with easy installation fits seamlessly into your DIY or CNC setup.
CUSTOM FOCUS CONTROL - Adjustable focal length from 20mm to 50mm ensures perfect detail on every project.
PRECISION POWERHOUSE - 4000mW optical output delivers razor-sharp engraving and cutting with unmatched clarity.
VERSATILE MATERIAL MASTER - Effortlessly engraves wood, leather, paper, bamboo, plastic, and more for limitless creativity.
SAFETY SUPPORT GUARANTEED - Class 4 laser with safety recommendations and responsive after-sales service for peace of mind.

The LASER TREE 4000mW Laser Engraver Module features a powerful 450nm blue-violet laser with adjustable focus (20-50mm) capable of cutting through 1-2mm plywood in a single pass. Compact and easy to install, it supports a wide range of materials including wood, leather, paper, and plastic, making it ideal for DIY enthusiasts and professional makers. Designed for high stability and efficiency, it integrates smoothly with CNC and 3D printer machines, backed by reliable after-sales support.

Common Questions

Are the products genuine and authentic?+

Yes, all products are sourced directly from authorized retailers in the US, UK, UAE and India. We maintain strict quality control processes and verify each product before shipping. All items come with applicable manufacturer warranties and are covered by our standard return policy.

How long does delivery take and is it reliable?+

Delivery times vary by destination country, typically ranging from 3-9 business days. Each order is fully trackable through our system. We handle all customs clearance and use reliable courier partners for last-mile delivery. You'll receive regular updates about your order status via email and our app.

What is Desertcart? Is it safe to order from?+

Desertcart is an international e-commerce platform operating since 2014. We securely process thousands of orders globally each day. Every product goes through our quality verification process before delivery, and we provide end-to-end order tracking, 24/7 customer support, and a comprehensive returns policy to ensure a safe shopping experience.

How is product pricing calculated?+

Our prices include the product cost, international shipping, import duties, customs clearance, and local delivery charges. We handle all customs and import procedures, ensuring there are no hidden fees upon delivery. PRO members receive additional benefits including free shipping.

₱8530

Duties & taxes incl.

Philippinesstore

Free Returns

30 daysfor PRO membership users

15 dayswithout membership

Secure Transaction

ChatGPT - opens in a new tab Perplexity - opens in a new tab Claude - opens in a new tab Grok - opens in a new tab Google AI - opens in a new tab

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Ravi S.

I loved the variety of products available. Will definitely shop again.

2 months ago

Ali H.

Fast shipping and excellent packaging. The Leatherman tool feels very premium and sturdy.

1 day ago

View all Trustpilot reviews

Manufacturer	LASER TREE
Part number	450nm 20W
Item Weight	99.9 g
Product Dimensions	11.99 x 5.99 x 5.99 cm; 100.07 g
Item model number	450nm 20W
Size	LT-20W-A
Color	Black
Style	Laser
Material	Aluminum
Item Package Quantity	1
Batteries Included?	No
Batteries Required?	No

LASER TREELaser Engraver Module, 4000mW Optical Power, Laser Engraving Cutting Module, Adjustable Focal, 450nm Laser Head for Laser Engraver Cutter Machine DIY Wood Paper Leather, Class 4

Details

Description

Specifications

Have a Question? See What Others Asked

Common Questions