INTBUYINGCommercial Laminating Machine with Crank Manual Cold Roll Laminator Machine Max 25 in Film 0.4In Thickness Foldable for Personal Office School

Exactly as advertised, good quality. I've seen some people complain about rollers having an odor on similar products, this one does not have any odor problems.

It says it supports come with the sheets but it’s no sheets in the box nowhere but product seems to be great but just didn’t come with the laminated sheets

This laminator, when properly adjusted, does a decent job (I use it for mounting photographs on Sintra.) However, the low price comes with some compromises.The pressure adjustment is loose and can be difficult to adjust properly. The lock nuts which are supposed to maintain adjustment are plastic and have to be re-adjusted every so often. Unlike most commercial laminators, which have springs in the tension mechanism to maintain even pressure, this one simply adjusts the minimum and maximum upward travel of the top roller, with about 1/8" of freeplay. It works, but it's not as stable or repeatable.The screw holding the flywheel (which the handle is attached to) has a tendency to loosen; some Loc-Tite is necessary to keep it in place. Also, the leverage afforded by the small-diameter wheel makes it a little difficult to use with higher pressures.The biggest thing going for the unit is the price, and even with the issues it represents a very good value — as long as you understand its limitations.

Hemos logrado laminar adhesivos, pvc, cartón y otros

One of my best tool

The box arrived in tact. No external damage. Upon opening it, I heard metal clanging. Something was loose. As I pulled the taped styrofoam item out, along came screws and washers. The I pulled the tape off to reveal the contents. The metal shelves were bent, including the mounting holes and the brackets were loose (not a big deal). I was able to assemble it, and it works, however the shelves wobble and just looks horrible.

Idk why but it wrinkles all of my designs

I purchased one Amazon claimed damaged box for a pretty good discount so I wasn't expecting perfect. Miraculously it showed up with all the hardware except a single flat washer because who ever assembled it at the factory wasn't given any tools. The first picture is how I took it out of the box.I switched the rollers around so the crank wheel is on the top roller otherwise as other reviews stated the crank almost rubs on the surface it's sitting on making it hard to turn without hitting your fingers.Seems to work for what I am doing but will probably make some upgrades in the near future. The fit and finish of parts leaves room for lots of improvements.