6-15mm 1/3" F1.4 CS Mount Varifocal CCTV Manual Lens for CCTV Camera

I got my cover back on, but it left a little gap around it. Everything still works, including the night mode and IR LEDs and sensors. Easy to focus.UPDATE June 2021:Pro Tip: You do not have to take the whole WyzeCam apart to install this lens! After doing a few of these, I found this super simple way to do it.1) On the front of the cam, you'll notice between the original lens and the black plastic surround, there's a rubber gasket there.2) Insert slotted screw driver between the lens and the black plastic surround. You'll need to push the rubber gasket in. Don't worry, just go slow and steady.3) Pry the black plastic piece off using the original lens as a lever. It'll pop right out.4) Use a pair of pliers to unscrew the original lens. It is glued in, so it will take some force. I've done this a few times and never lost a camera doing it. I did lose a camera by disassembling one, when the ribbon cables frayed, so in my experience, it's safer to keep the cam intact and force the lens to unscrew by breaking the glue with a bit of strength.5) Screw in the new Xenocam lens. If you screw it in until the set screw for the zoom touches the white case, it'll be almost perfect. Depending on the range of view, you might need to remove the first set screw and continue screwing it in.It sounds kind of scary, but it's pretty easy once you gain the confidence to use a little force. The improvement in image quality is amazing. I'm using half a dozen or so right now and loving every minute of it.

This lens was relatively easy to install, but be aware you might have to search for online videos on how to disassemble your camera. The lens is higher quality than the original. I thought I was going to have to get a new camera (Akaso V50x) after badly scratching my lens. I am delighted with the value of this replacement lens!

The hole in the body of the camera is significantly smaller than the body of the lens that needs to fit in it. There is also a double stacked circuit board in the V3 where the lens body needs to fit through the hole to even reach the threads on the 2nd board. You can file the plastic hole in the body larger but Im not talking 1/16 - 1/8" off a multi layer circuit board.

The 6-60mm 1/3" CS lens is a great value for $24. But it isn't a perfect product.The PI HQ camera has a 1/3" sensor. Yet for a good 40% of the zoom range the image suffers from notable vignetting. (The 4 stars is because it claims to be a 1/3" camera.)If you zoom in, the vignetting is less a problem.I use mine for zooming in as much as possible from 2-4' away to film benchwork assembly activity for tutorials and am quite satisfied. But if you want to zoom wide, you see serious distortion around the edges with a 1/3" sensor... Like that is the PI HQ camera.

Was supposed to fit gopro hero 7, it didnt, not even close.

Used for a Swann PRO-642 video camera, NTSC 976 x 494 pixel, 4.8 mm / 57° lens. This Xenocam 12 mm lens fit perfectly. About 5 turns and it focused, about 2.5 x magnification. Not enough to read car license plates at 90' but can easily see the make and model. Thinking about trying a 20-25 mm lens (those may be too tall).

I bought this to upgrade a Wyze Camera V2, installation was easy. It was much harder to remove the old lens than it was to just screw this in. Picture quality is great! Adjustable zoom is a very good value for the price when considering other similar options. I only wish I had bought something with a greater zoom but this works for the purpose I need.

okay, I know I shouldn't be using it in a wyze cam v2, but yeah, it works, I do not recommend since it's going to be really tricky to focus since the camera doesn't leave enough space for you to work with a lens this size, it is a great lens in case you want to use!btw I'm using a few wyze v2 as webcams for stream setup and I have multiple lens for them

If you can't adjust the focal length for the zoom range (9mm-22mm) then what's the point? A full zoom to I guess maybe 20% back, I can adjust the focus to a sharp picture. However the focus will not work for anything closer. I ordered two of these for two Pis (one outside viewing my dock and boat, which this might still be ok for, and other for inside, which this is not wide enough) and I'm not sure I can use either. I bought them because I wanted 9mm for one application, then 22mm for another. In both cases I liked the option of zoom adjustment and focus.

I tried this on 3 different cams with numerous spacers and could not get the lens to focus. I tried reaching out to the vendor but did not recieve a reply. Back it went.

I bought this as a replacement for my runcam FPV camera. Its a little large but does the trick.

No tiene buena resolución, recomiendo observar otras opciones

Nice little cctv camera lens fully adjustable.