🚀 Elevate Your Communication Game!
The 2' Foot Fiberglass 1000 Watt Black CB Radio Antenna combines cutting-edge VibraSorb technology with premium materials to deliver exceptional durability and performance. Designed for those who demand reliability and style, this antenna is perfect for enhancing your communication experience while proudly supporting American craftsmanship.
Maximum Range | 2 Feet |
Color | Black |
A**R
Perfect Antenna
I purchased this antenna to replace my aftermarket FM/AM Radio antenna that got damaged and corroded in the middle. I use this antenna ONLY as my FM/AM radio antenna, not CB antenna. For this "receiving only" situation it works perfectly! I can not attest to a "transmitting situation" and do not know what the RF would be. The antenna was the cheapest priced antenna i could find while keeping quality up. It is skinnier than i thought it would be, which is always a plus, and it has quite a bit of flex to it. I gave the durability rating a 4 star only because i do not know how it will hold up yet as i only just installed it. I did flex it a bunch before installing it and the coating and Fiberglass rod seem to be of good quality, something that was lacking on my other (non name brand) antenna. So far, i am a very happy customer. I would recommend this product!
A**R
CB antenna
Works as advertised. Nice antenna. Just the size I was looking for for my side by side.
A**H
excellent quality
I bought a low power cb and coupled it with a short antenna. I have no range. Although it works for me, as I am usually near to the radio I'm communicating with, I can't imagine that it would be useful for anyone else. I think that the biggest problem is the inexpensive, low power cb. I imagine that the short antenna doesn't help the situation.
Z**M
Will need tuned.
Antenna came tuned for about 24mhz. Ended up cutting multiple feet of wire off to get it up into the CB band. When youre tuning it and getting close, make sure to put the rubber cap back on for the last few cuts and measurements. It shifts the tuning up about 200khz in my experience. Used a nano vna and checked with an inline meter for the final reading.
S**R
SWR HIGH
Tried to match this with a Bearcat 980. I thought I was having issues with the mount or the wire because the SWR was pegging out at 9.0 on all channels even with trimming. after triple checking everything else for direct ground, tried a new antenna and that got it.
L**S
It is totally tuneable
OMG yes it is tuneable it's amazing , moron's can post a bad reviews but can't do a simple tune on this antenna. It is not a 3 foot cut to. 2 foot geeezzzz it's a 2 foot antenna you don't cut length with a saw. to tune you pull off the red cap grab the red copper wire that is just under plastic pull out small amount of wire cut wire put cap on test with swr meter. Out the box on my Jeep seen channel1 was 5 see on channel 40 it was 8 swr means antenna too long I removed cut 6" went down 2 swr points removed another 6" of wire see really close now so I cut another inch of wire . Now channel1 1.7 and channel 40 1.6. Pretty good so I was done took less than 5 minutes . Firestick has a screw on top for adjustable makes it easier but this antenna is great totally tuneable just BE CAREFUL not to cut too much wire little bit at a time then check awr you can tune making it too short if this happens you can make longer again by adding a spring or quick disconnect to antenna bottom then remove more wire as needed being careful
H**R
Sent me on a wild goose chase.
I had an old CB radio laying around I wanted to put in my truck. I still has the mount and old fiberglass antenna but they were faded and rusty. I ordered this antenna and an external mount for my truck as well as some coax to get it all the way into my cab. I reused my old coax connector on my antenna to start with. I was having issues so I ordered a swr meter that was reading 7, way too high. I replaced the mount, no go. I replaced the coax, no go. I verified everything was grounded and checked all my cable runs. Changed the jumper on my swr meter. I was down to everything but the radio and this new antenna. The radio was old and cheap so if figured that had to be it. Bought a different radio. Same results. It was the brand new antenna. I stuck my old antenna on and got a swr reading of less than 1.5. Just remember just because it is new does not mean it is good.
A**R
No nut
The product is cool just to let you know it comes with no nuts or washer so you have to buy online it’s $15 it’s metric so it’s hard to find it at the store the size is M10-1.0 , I looked over 2 home depot stores but didn’t find it .Thank you
Trustpilot
2 weeks ago
4 days ago