Alla Lighting BAY15D 2057 1157 LED Strobe Brake Lights Bulbs, Pure Red 7528 1154 3496 Flashing Stop Lamps Dual Filament 12V for Cars, Trucks, Motorcycles, Trailers

Super bright, the pulse is great!

Nice! touch the brake and the LED red Flashes three times and then stays bright red.Have installed them on all the motorcycles. would be good for 4 wheel cages too..easy peasy to install. same as the conventional 1157 bulb.

The media could not be loaded. Several years ago I had an inline flasher unit wired to my Ural's two brake lights -- very effective but additional cost and time required. Finally we now have the flasher unit integrated into the LED bulb -- this is what sold me. Even at about $10 per bulb this option is way cheaper and easier to do. I would prefer the "3 short and 3 long flash" pattern but this simple "3 flash" works AND the bulb is extremely bright. Installed this bulb on my 2022 Royal Enfield Signals: see video.

Love the brightness on these guys and they were easy to throw on and for perfectly. Only complaint and it might be an issue with my car not a actual bulb thing.. but they flash three times while pushing the break in. Other then that I have no complaint.

Brake lights work great! They are bright and easily visible, the flash pattern is very attention grabbing so I have no worries about not being seen when coming to a stop. The bulbs fit correctly and the color and quality of the bulbs are exactly what I was looking for. I highly recommend these as I have had them for over a few months and have had zero issues with them. Would definitely purchase again

People today seem to think they have the reaction of a Nascar driver and ride on your bumper. These are great, one press it flashes 3 times then goes solid. Had to hit my brakes due to traffic with a bumper rider and gave them great warning. But another one thought I was brake checking them and flipped me off (old person to bad). Highly recommend them if you commute in heavy traffic and don't want to deal with a rear end collision. Also have similar for my motorcycle.

So many cheap Chinese clones of the same product left me scrambling for which tail light bulb set to buy for my motorcycle.I’d been using a replacement LED in red for a few years, after burning through one too many incandescent 1157 bulbs. My problem with the LEDs is found were they were too bright; the “running light” mode vs “brake activated” modes were hard to differentiate from one another and I imagine from the car behind me.This bulb actually works. Go figure. It blinks a few times when you first apply the brake and then goes solid. The light levels are different enough to be noticeable as well.Let’s hope it holds up because I’m actually happy with it. I’m sure there are a bunch of brands all cranking out of the same low rent Shenzhen factory, but it seems like this one is actually ok.Color me red. And amazed.

I've used Alla brake strobes in a Subaru Crosstrek, 2013 Kia V6 Sorento, and 2020 Toyota Tacoma V6. I also put the brighter backup lights in the Sorento and Tacoma. These were for my 1st leased car, a 2021 Kia Sportage. Since it was leased didn't want to put "xtras" in it. At lease end, I bought it. Then swapped these for the OEM bulbs. From my history it would be a good value for the added safety. After install I tapped the brakes while the ignition was OFF. They strobed 3 times then stayed on steady. Released, repeated. Same result. Then I turned the car on I received a both brake lamp error code. What happened when I turned the ignition key turned on was that I got 3 strobes then NOT a steady brake lamp; rather quick constant flickering instead of steady. The car didn't have to be running, just have the ignition on, but acted the same way with the engine running, Once the ignition was turned off and I stepped on the brake (as when I installed) they worked correctly. I contacted Alla and left my problem. I've not heard back. I certainly won't drive with them working this way. So, I swapped back the OEMs.