6 Port 10G Ethernet Switch Unmanaged, 4 x 2.5G Base-T Ports, 2 x 10Gb RJ45 Ports, Compatible with 100/1000/2500Mbps, Metal Fanless, VLAN, YuanLey 2.5Gbe Network Switch for 2.5G/10G NAS, Wireless AP

These Chinese brand 2.5Gb switches (all of which use Realtek 2.5Gb switch chips) are excellent. While not the very fastest in benchmarks (see: ServeTheHome), they are consistent and almost linespeed even with all ports fully loaded. They are solidly built, with a nice feeling metal casing that's painted very evenly. Connectivity is spot on, and most variants including this one incorporate one or two 10Gb SFP+. The mixed mode connectivity means I have two of them uplinked together with single mode fibre (BiDi). Mounting was easy - I wall mounted one and rack mounted the other with the (sturdy) included rack ears. Setup is plug and play, as these are L2 unmanaged switches. Even with PoE and SFP+ they run cold, no issues with functionality under load at all. Best value for money 2.5Gb switches on the market, in my opinion!

Network switches are not the most exciting of things, so writing any kind of review isn't easy. Unless you're a network professional, a switch like this is likely all you'll need. Now, I am by no means any kind of networking expert. No! I'm in the camp of: Plug it in an I want it to just work. For those interested, and very new to all this stuff, there are two basic kinds of network switches: managed and unmanaged. Most switches at the lower end of the price range, of which this is one, are unmanaged. What does that mean? The likelihood is that if you have to ask, you don't require a managed switch. What I do know is that a managed switch allows much greater control of the connections, including the ability to link aggregate, AKA bonding, I think, groups of Ethernet ports to act together at a hardware level. Beyond that, there are other things you can do, but that is way beyond my needs or abilities.For most regular consumers who find themselves needing a switch, there are two metrics. Speed and number of ports. By far the most common speed for network switches is still the 1 Gigabit AKA 1 GbE variety. pretty much any computer that has an Ethernet port will offer at least a 1 Gbe connection speed. One of the most common errors I hear from people is the confusing of Gigabyte and Gigabit. They are two vastly different speed ratings. Even ISP's when pushing their Internet speed option will often substitute Gigabit/megabit with Gigabyte/Megabyte. Be aware the actual speed differences are significant. A Gigabit translates to a theoretical max throughput speed of 125 Megabytes/sec. A Gigabyte per second speed translates to approx 1,000 Megabytes/sec. For most home users, a 1 Gigabit Ethernet network switch is plenty enough for their needs. however, a newer, faster speed, 2.5GbE has become increasingly mainstream and, as it's name suggests, offers up to 2.5x the speed of 1 GbE Ethernet.The most relevant metric for most home users will be the number of Ethernet ports offered. Of course, this depends on your needs, but it is useful to opt for a switch that has more ports than you think you will need right now.If you're looking at this review and are still wondering what a network switch is and why you might need one, stay with me. I am someone that believes a review should also encompass those just starting out and may not know the things others do. The easiest way to think of a network switch is like a power bar adaptor. You know, those plug bars you use when you've run out of available power sockets next to your TV. Network switches perform the same basic function. They allow you to connect multiple Ethernet cables into a single box with one of them going to a computer or your router etc. With a router connected to one port, any devices connected to the other ports on the switch will also have access to the Internet over a wired connection. Unmanaged switches, like this one, are just plug and play. You connect your Ethernet cables and it all just works, and that's the way most home users want it.This switch is an eight port model that offers eight 2.5GbE standard RJ45 type Ethernet ports and a 10GbE SFP port (likely never used by most people, but really nice to have).Now, bear in mind that a switch offering up to 2.5 Gigabit/sec is of little value if all your devices only support 1GbE. A 2.5GbE switch like this isn't going to magically turn your existing 1GbE network into a 2.5GbE one. So, for example, my main PC has a 2.5GbE Ethernet port which I have a standard Cat 5E cable attached to (Cat 5E will work with 2.5GbE connections, so no need to spend more on CAT 6 or 7 Ethernet cables) and now connects, via this switch, to a second PC that has recently had a cheap 2.5GbE Network card installed to replace the built-in 1GbE one. Transferring large files across between these machines sees transfer rates of up to around 240 Megabytes/sec. This compares to around 110 Megabytes using standard 1GbE connections. However, another machine connected to this new switch, but only fitted with a 1GbE Network adaptor will not benefit from the faster switch.So, given that currently there is quite a price premium on 2.5GbE switches compared to standard 1 Gig offerings, it might be worth bearing the above example in mind. Still, I opted for this switch due to a Black Friday sale and the fact that it was significantly cheaper, even when not in sale, than more readily recognizable brands, such as TP-Link, Netgear etc. So, for me, to have an eight port switch capable of 2.5GbE on all eight ports and a 10GbE SFP port too, and all for under £90, was a bit of a bargain I couldn't resist.The switch itself is a long, rectangular box that has LED's above each port and a power jack on the opposing side. This may be a negative to some who prefer all connectors, including power, to be on the same side. For me, though, this worked out quite well with my cabling arrangements. While on that subject, what was awkward was the power plug supplied with this unit. It has an overhang that can potentially block other nearby power sockets, but has the overhang raised a little to help avoid this. Alas, my switch is connected into a APC UPS that has two rows of sockets that are staggered opposite one another. I was not able to seat the supplied plug with other plugs inserted in an opposite socket due to this overhang. Fortunately, my old 5 port switch I am replacing had a very similar shaped plug of the same voltage, but its overhang was just a fraction higher and cleared the other connected plug. Manufacturers need to think a little more about the shape of their power plugs to avoid such things. If you had a similar issue, you could likely get around it by using a double adaptor plug block to raise it up, but it's not the tidiest of solutions.As most of my devices are operating at 1 GbE speed and I only have one port using 2.5GbE speeds of the five I have connected, the switch runs very cool, only slightly warm to the touch. What this does lack, like so many other modern devices, is a set of rubber feet to elevate the unit a little off the surface if not wall mounted to facilitate better air flow around the unit. In addition, rubber feet prevent my switch from slipping under the torque of the various connected cables tugging this way and that. So, I had to purchase a cheap set of pads and stick them to it to fix this. Not a big problem, but one that is common place these days on appliances.Other than that, there is not a lot more to say about this switch. It works and works well. Switches are not fancy or glamorous, they just sit there doing their job and we forget about them. This is as it should be and so far after a month or so of use, this switch has performed flawlessly.

Bought a NAS recently so wanted to update my local network. This switch is pretty cheap and works well. Does what it says on the tin. I get speeds of of around 270+ mb/second between my computer and the NAS (with a 2.5gbit) network card in the computer (separate upgrade). Plug and play, just plug in the power, plug in the network cables and worked straight away. It could not be easier.

I really wanted to like this switch. On paper, the YuanLey 2.5GbE switch (YS25-0502 in my case) seems like a great value, metal housing, silent operation, 2.5G speeds across all ports. But after a week or so of real-world use, it started showing serious issues.Devices connected through the switch started experiencing random packet loss, high latency, and noticeable lag — even when just browsing the web or doing local file transfers. I ran flood pings between two PCs connected via the switch and saw latency spikes of over 13 seconds, 4% packet loss, and wild jitter on what should have been a rock-solid wired LAN.When I removed the switch and connected the devices to my old 1gb TP Link switch, everything worked flawlessly again.It seems the switch either overheats under load, has power regulation issues, or suffers from unstable internal hardware, I can’t say for sure. But if you're relying on stable performance for DNS, gaming, or local services (like Pi-hole, AdGuard, or file sharing), this switch might let you down.I was 50/50 on if I should contact the manufacturer for a replacement but after these issues in such a short time I decided it was too much risk, so have returned to amazon for a refund.Sometimes things are just too good to be true and in this instance buying cheap was not worth it.

The hub works as expected, providing 2.5G connections. However, using the 2.5G port on VM's Hub 5 is problematic. The Hub 5's 2.5 G port does not support 802.03az (this issue was introduced in February 2024). As this is an unmanaged device, you can not disable it in the switch.If you factory reset your Hub 5, it will start working. (After any updates, you will likely need to repeat the process. After a reset, any setting you have made, e.g. password, etc., will be lost or revert to what is printed on the Hub 5. MAKE SURE YOU CAN READ THE PASSWORDS ON THE DEVICE BEFORE DOING THIS.)

OK this was half the price of my previous switch (that mysteriously stopped working just outside of warranty)There's got to be a catch, right?Well so far for me, no. This Unmanaged switch just plugged in and worked. It is small, silent and has performed perfectly. Most of my network is only 2.5Gb so I can't say I have maxed out the throughput, but it has given me stable speeds across my network of 280Mbytes per second when transferring big files.Not much more to be said, plug in the PSU, plug in the network cables and ... enjoy

Works really well, great for home/home lab use. I have a 10G SFP uplink to it from my main switch and I can max out both the 2.5G and 10G connections on devices connected to it, so the total throughput is pretty decent.