KTC27 Inch Gaming Monitor - 2K QHD 2560 x 1440 Monitor, Up to 210Hz & 1ms, Bulit-in Speakers, Adaptive Sync, HDR400, 131% sRGB, IPS Monitors Gamer with HDMI 2.0 x 2 & DP1.4 x 2, H27T22C-3

I have been pleasantly surprised with this monitor. It was listed for only $110 and I got it $10 off so paid only $100 + tax. To get a 1440p monitor for so cheap is really incredible. The monitor does kind of have a cheaper feel/weight to it but it preforms well and that's what counts as far as I'm concerned. It came with an HDMI cable which is adequate for a monitor that only does 100hz. If you prefer Display Port than it has an input for that but you will have to provide your own cable. As someone who pretty much exclusively plays single player games 100hz is plenty for me.When I decided to buy the monitor I couldn't find any reviews for this specific version (24" 1440p 100hz). There were plenty of good reviews for other versions but not for this one. I am glad I decided to go ahead and buy it anyway. It really is a nice step up from my previous 1080p 27" 75hz LG monitor which I think was probably meant more for an office than a gamer. I was not sure how noticeable the jump up in resolution would be but it is noticeable and quite nice. The games look better, text is clearer and easier to read, and I noticed that even the UI for Windows and programs I use like Shotcut just look better and seem to be made with higher resolutions (QHD and above) in mind. The jump from 75hz to 100hz has been less noticeable but again I play single player games, also I prefer to play with a controller, and I come from decades of playing on consoles where a solid 30fps is considered pretty good and 60hz a bit of an anomaly.This monitor does accept an HDR signal but I have not been able to test that out much yet. Also I don't believe it has the HDR 400 certification but at this price this is not surprising and from what I hear HDR 400 monitors aren't really all that great for HDR. The cheapest HDR monitor I've scene recommended costs $280, which is quite a jump up from the price of this monitor. Also Windows reports it as a 10 bit monitor. I'm not sure if that was mentioned in the specs but that is nice to see on a budget monitor (instead of only 8 bit). One thing some people might not like about this monitor is it does not have much customization in terms of brightness and colors and things like that. If you are the type of person who really likes to tinker with those kinds of sliders and settings than this is not the monitor for you. It has 7 different presets that you can choose from but that's just about it as far as the choices go. For me there are a few that I like so I have no complaints and if you like to keep things simple than this could be a positive but if you need to tinker than find a different monitor. It does have crosshair and FPS counter choices in the settings but I have not tried them as I do not have a need for them.Before finding this monitor I had never seen a 1440p monitor at 24". They were always 27" and above when I looked. I have to say that initially I kind of missed the extra screen space with the 27 incher but after a couple weeks I got used to it and honestly do think it is a great size. It allows me to be closer to the screen and actually sit at my desk whereas before with the 27" monitor I had to sit a bit back to be able to comfortably take in all the screen real estate. If you are coming from a smaller size monitor than I think this will be a nice upgrade. If your previous monitor was bigger just know that it might take a week or 2 to get used to the smaller size but I think that once you do, you will not miss the bigger screen. Also the pixel density is pretty high at 1440p 24" as most monitors this size are only 1080p.So in conclusion if you are like me and just want an inexpensive but well made 1440p monitor, than I think you will be happy if you choose this one. This KTC H24T27 is very nice for single player gamers like myself or anyone looking for a 24" 1440p monitor. If you are the type of gamer that plays multiplayer games and needs high refresh rates than obviously this is not the monitor for you, I would suggest something with at least 160-180hz.

This is a great 2K monitor for the price. You'll want to adjust some of the settings on the monitor itself. At first things like icons are a little blurry because they're so bright. Adjust the blackness level and pump up the sharpness to fix that. Also, you might as well kick the Overdrive to full or standard so you get the best out of this one. There are a few HDR options as well so set those to whatever you're use needs are.I can't speak much on durability yet because I haven't owned it long enough. I will say that the stand is a bit cheap but at least it's actually metal not plastic.It works great for gaming, especially if you're using a DisplayPort connection. It's not a super high refresh rate but for my needs it does fabulous. You might want something with a higher refresh rate if you're into competitive FPS games but for pretty much everything else this monitor does great.I don't use built in monitor speakers so I can't say how well those are because I didn't even try them out.Overall, I'm really happy with this monitor so far. If durability becomes an issue I'll revise my review but at this point everything is going great. I didn't really have an expectations with this one given the price point but it has really surprised me with it's quality.

I've been using this Viewsonic VX2778-SMHD 27 inch monitor since Jan, 2017, Very nice monitor! But, then I built a dream machine. i7-14700K on an ASRock Z790 Riptide motherboard with lots of SSD's and NVME drives. 48 gigs of very fast RAM and two DVDRW's. I'm pretty good at this and I did my very best not to allow any bottlenecks and not spend money on silly things. It absolutely screams; it gets stuff done fast! I also have an older Intel computer, an AMD computer, and a Raspberry Pi in here. So I have an HDMI KVM switcher and an HDMI audio extractor (audio goes straight to a competent home stereo). So, I don't play any games anymore, but I do want to get stuff done!There came a point where I wanted to make use of this somewhat better video card that's better than anything I've ever used. (Still not for gaming, tho.) I scoured Amazon. I ended up getting an NVidia GeForce GTX 1660 used, that was DIRT cheap! I chewed my nails wondering if it was going to work, but it did and it does! From the first momen, for about 9 or 10 months! I forget how much memory it's got, but it's up there. So, now, I had this video card mostly going to waste (Except for hardware acceleration; that's really nice!) So, I measured how much room I have. If I looked at monitors with really thin frames around the screen and measured and did the math... I decided on 32 inches. I scoured Amazon again and got to this monitor: (KTC H32T13 32 Inch)I had a little trouble. First of all, I'm lazy. I was still building that i7 and I set the monitor aside after unpacking it and went through all my other stuff I had to do first. (The other 2 computers mentioned above both needed some help.) (And the computer room needed some rearranging.) There's also that fact that there was absolutely nothing wrong with the old Viewsoni; there was no pressure... Anyway! From March 22nd until just now - two days ago - it just sat there. I don't even know where the quick start guide or whatever it is, went to, and I didn't want to conduct a lengthy search. Someone wrote that the power button is in a bad place. It's not that bad at all. I spent a little while finding it; reach your hand around the monitor's right side, near the bottom and feel for it. It sticks way out. The only time I have to reach for it is when I'm leaving the computer room to watch TV or go out or whatever. I can't reach it sitting down, but I'm getting up anyway at that point. Then I was totally puzzled, trying to figure out how to set the settings on the monitor. It wasn't bad, but I wanted to tweak the brightness, contrast, hue, gamma, etc. It took me quite a while to figure out that that power button, which is also a menu button (if you just touch it instead of holding it for three seconds) IS ALSO A JOYSTICK! Remember that! You can move it left, right, up, and down. Once I figured that out, it has a VERY logical, easy to use menu, unlike the Viewsonic mentioned about. The next problem I had was that a lot of things were ghosted in the menu and couldn't be selected. Scratching my head, I theorized that probably the video card was running the monitor and I turned to the NVidia Control Panel on the computer. There are at least three different places to set all that on that i7 machine, but it ended up being the screen display settings that did it.I love this monitor now! Plenty bright, fast, 2K, really great picture!! If the power button in the back is even a negative, I don't mind a bit. Everything else about it is outstanding! In about a minute, I had all those settings set. Beautiful bright, colorful screen! Perfect! I also have an older Silicon Dust HDHomeRun dual tuner. I encountered something that's never happened before! Watched "The Rifleman" in black and white. NEVER BEFORE have I had perfect black and white! Always some kind of tinge, usually in the dark places. I mean PERFECT black and white! Then I watched some stuff on Charge! (Streaming) and I adjusted color saturation and hue and got the skin tones right. Absolutely perfect picture, no matter what I do, now!!This is not a cheap budget monitor; this is an inexpensive performance monitor that works extremely well! I completely recommend it and I think it's a super nice deal for the money!!