VEVOR 1/4HP Furnace Blower Motor 1725RPM, 115V 5.2A Belt Drive Blower Motor Single Phase - 0.39" Shaft Diameter, 0.78" Shaft Length, CW/CCW Rotation

This motor works well, and can save a lot of money especially compared to a technician recommending a new furnace for $5000 or more.My original blower motor was installed incorrectly at the factory. Apparently, the mounting holes were not placed correctly so the factory installer removed a sleeve from one of the three isolation mounts to thread the screw into a misaligned hole. Also, the holes were not parallel to each other, making the new mounting brackets not fit. I bent the new mounting brackets and used two of them and one old one. The impeller is not centered in the housing, but rotates smoothly. There is no rumbling with operation, and the fan and motor are at least as quiet as the old one, but probably less noisy. The capacitor is round and would not fit where the old one was, so I mounted it on the sheet metal of the furnace instead of on the fan housing. Also, I had to use heat-shrink style crimped connectors for the wiring.The product is great, and I am pleased Amazon carries it. But if you expect a 30 minute installation, your experience may not match your expectations. The directions are poorly written English, probably simply machine translated from Chinese, and I think the coil resistance values are nonsense. I studied wiring diagrams before I started, twisted an allen wrench getting my old set screw loose, used a hammer and punch to remove the old motor shaft from the impeller, and drilled holes in my cabinet to mount the capacitor. The reward was perfect operation when I applied power to the furnace at job completion.

Great universal blower motor. Used it to replace ADP motor 76700672 in an ADP BRCM3924S2N4 hydronic air handler. Easy replacement. The new motor comes wired with female space connectors, so I cut the plug off of the old motor and crimped male spade connectors onto the wires. The old motor was 3 speed, so I did not need the fourth speed of the new motor. working well at high speed after two days.

Why did you pick this product vs others?:Great product

Bought this motor as back-up for 13 year old trane unit that might need one some day. I don’t want to be without a/c when it’s 99 outside and I have to drive all over town looking for one.I’m okay at DIY so should be something I can handle. Retired and for $90 it’s just insurance and peace of mind having it.

Easy to install and wire up.

Good little motor came with mounting brackets and capacitor.

This motor blowin blower motor SOB is still working like a charm 4 months later.Vevor saved me at least $800 and for that I thank ya.It was cold. This helped me be not cold. And now that it’s hot, it’s helping me to be not hot. Well, as much as possible because hot flashes.

Bought this to repair a Tempstar furnace. The specs matched the old one but this was 2 bills cheaper than the exact one specified. All of the wires matched except one. Quick check indicated both colors (original vs replacement) were speed related so I felt good plugging it in. Runs good, nice and quiet.