SEALIGHT 9007 HB5 Powersports LED Bulbs for ATV, Super Bright Hi/Lo Dual Beam Powersports LED Bulbs, 6000K Eye-Protection White, Quick Installation Halogen Replacement, Pack of 2

They were some what difficult to install, because the air cleaner, and the battery were in the way. However that has nothing to do with the product. I replaced the orginal lights at the same time on my tundra, and xterra. It's important to make certain that the lights fit the correct vehicle! As there's several different configurations. So do your research please.

Fit perfectly in my 2016 ford fusion. I had to take the bumper off (that's Ford's fault). Bulb itself was easy to install. If you look at the photo there is a big missing beam pattern at the bottom, not too bad actually consider this projector is designed for halogen. Not 600% brighter. I would say maybe 60%. But the cold color made it seems much brighter.About longevity, I'm not sure. But the lower wattage probably will help.

2002 Dakota. Lights work perfect-no adapter kit needed for mine. Yes I installed them 180 degrees in the wrong direction the first time, but easy to spin them to the correct position. The bulb separates to allow the fastening ring to slip past the bulb for securing to the headlight housing.

Why didn't I change to these years ago!!!!! I drive 120-150 miles a day for work. Most of that is after dark. If you have ever driven on new blacktop roads in the rain in the dark...you know how life can suck!!! You can't see the road most of the time. And if any car is coming towards you at night..The city where I live is currently re-topping every road in the city. Many still don't have lines on them. I just (3 months ago) bought the most expensive Halogen lights available. And while an improvement from what I had...still pretty pathetic.Tonight, after changing this today, WOW!!!!!!!!! I couldn't believe how much better I could see. Signs were lighting up as if an actual sign light was on them. I was out in some very wooded winding road areas in a fog and mist that make that kind of driving a bit scary. Tonight it was amazing! I don't have enough great adjectives for how awesome these are.I can't report on longevity as I don't know yet. Maybe I got a bad one that will die tomorrow. I hope not. And it does I'll addendum my review.As for installation in my 2014 Nissan Frontier... beyond simple. I watched a couple of videos before I got them which made it seem like it was a bit tricky unless you watched the videos. The ONLY thing I knew from them that I really needed was that you remove the locking ring that comes ON the new lights before installing the lights. Here is the simple as-can-be-install guide from my doing it:1) Twist off the current locking ring from the existing lights. (this can be a pain on the battery side but it can be done without taking out the battery if you can at least move it over a couple of inches.)2) Pull out the existing headlight bulbs.3) Disconnect the bulb from the wiring by lifting the locking clip and pulling the bulb out.4) Take the locking ring off the NEW LED lights.5) Put the new locking ring into the back of the light fixture. There will be 3 indents to line up with 3 outdents. This will make sense when you look at it. VERY simple to understand when actually looking at your assembly. Press it in so it's secure and flush.6) Take the old locking ring and put it back into the back of the light fixture and lock it (over the new ring) into place.7) Insert the new LED into the hole, lining up the 2 indents in the ring with the 2 outdents on the bulb. One is a touch wider than the other so you can't get them backward. Once pressed in turn (lock) it into place so that the LEDs are facing 3 and 9 o'clock. In my case, it meant the wire sticking out of the light was pointed UP toward the hood.8) You are done. Literally, each side MAY take you 3 minutes to do.I hope this helps you with your installation. It really is even simpler than they make it seem in all the videos. And it will blow your mind when you see the difference if you are going from Halogen to LED.Greg

For anyone having problems with high and low beams seeming like its reversed rotate them 180 degrees. For me this was having the wire that comes out from the bulb to be positioned at the bottom.

Reasonably easy to install after viewing video showing how to separate 2 parts of light in order to lock it in place using old locking systems of original vehicle.. After viewing another online video showing it was ok to cut the old attachment device the installment was much easier. Have to wait and see about how long the lights will last.

I'm happy with these lights. They are bright enough to light up the road. Compared to my old halogens, it's like night and day. There's no flicker, just a steady beam of light.

Upgrade from factory bulbs. Fit great. Make sure you don’t try and insert with both old and new washers in place (just one). Watched a YouTube video and it took about 30 minutes total. No additional accessories or steps needed - work and look great.

My rs200

When I was looking to replace my existing halogen bulb with led I was bit confused and hesitant to try new product because I saw a review online stating the error codes are coming on dashboard when replacing factory halogen bulb with led light. I found some YouTubers using the same light for their Elantra and when I ordered one for me and installed it till now it works really great and no error code issue has encountered. Although Amazon Fit Tool shows incompatible with Hyundai Elantra, it still works fine.

Brighter than OEM

this set of lights fits my lancer 2004 and my nissan versa note 2015. It works great. I'm happy about my purchase. Highly recommended.

Easy to install. Super bright and nicely packaged. Hope it lasts at least 5 years. Did not use the zap straps, mounting tape and cloth gloves.