Boss FS-6 Dual Foot Switch

Good, small size and sturdy built. 9V Battery included. Connecting from Line A&B Stereo jack did not work for me. However, I used a Y Cable from line A and from Line B from the footswitch and a single stereo jack to the amp and it worked nicely. Now I am able to access four channels from my Katana-50 hands free. I am keeping this.

It is compatible with Boss RC-202 and Roland Handsonic.It is solid and works I'm happy with it and will recommend it to others needing quality Pedal.

comes with a battery. TRS cables are not included. Needed to order TRS cables separately so that i can use the footswitch properly.

Awesome great good nice

Nice

Made in China

It's ok that'll

This is a heavy duty sturdy foot switch and looks well made. I run mine off a 33 foot cable and it works perfect. I do not like to stand too close to the amp and that is why I use a long cable. It is powered by a 9 Volt battery which is included with the switch. I have seen some reviews were some are not happy about having to use a battery. I personally like the fact it is run by a battery as then no need to hook it up to a power supply. I am not sure how long the battery will last but no big deal as one can buy a few rechargeable 9 Volt batteries. I use this switch with the Boss Katana - 50 MK11 Amplifier which has 4 channels that one can program to various amp settings. After buying the switch with only two foot switches I assumed that one can only access two channels and not 4 and then thought I should have looked for a switch with 4 switches on it. However it access all 4 channels At the back of the switch are 3 locations to plug the cable into as A or B or AB. To access both Switch A and switch B, one just needs to plug the cable into the middle AB input . A basic guitar cable will psychically fit but will not work so make sure you get the right type of cable. The cable will have two black lines, separating 3 sections. I bought mine from Amazon.ca.. At the back one can flip a switch from "Momentary" to the “Latch” position as if not, one will not be able to access all 4 Channels. With Latch mode, one pushes the switch down, and a channel is then locked in and when one pushes the switch again then the channel is no longer locked in. With the momentary setting one must constantly have the switch held down and that is why one could not access 4 channels unless one can push all switches down at the same time. Have not had this switch a long time or used it a lot but so far I am 100% happy with it and would easily recommend it to anyone. Shipping was also very fast and we all like that.

Muy bueno..

It's been a couple of days since I've gotten my hands on this. I didn't have a chance to use it with both of its switches, since the Hosa TRS cable I ordered has not arrived yet. I'm using this with Roland Cube 40XL, especially for the looper. This pedal is really sturdy, in fact it is so sturdy that I find it hard to press in home with my bare feet lol (maybe would be easier to press with shoes/on stage), and I sometimes find myself spending tens of minutes for trying to loop just one phrase. You need to have a really good sense of rhythm to use this for the looper, as Cube 40XL's looper's playing detector that starts recording when you start playing DOES NOT engage when you use the pedal, you need to start playing as soon as you press the pedal (you still can start the looper from the amp itself). Yet, when you do get used to it, it makes wonders. It's also annoying that you have to unplug EVERY cable that's plugged in it to prevent power consumption, which can only be supplied with a 9v battery; another reason for down rating. I recommend this because it is an all-purpose device with latch/unlatch and polarity options, but if you're going to buy this for a Roland Cube, you'd better convince yourself that you really love music and have the time and patience for it, since this is a bit overpriced and MAY(not if you have a really good sense of rhythm) require you to re-record your phrases for the "perfect loop" time after time. EDIT: My cable has arrived, and I've changed my opinion about this pedal. You will still need a sense of rhythm for using this with the looper of a Cube XL amp, but only as much as an average music person would, no more. I was annoyed earlier because I should not have switched the B pedal (the one for engaging the looper) to the "unlatched" mode; it needs to be in the latch mode, and your amp should be in the latch mode as well (to do that, you turn off your amp and press and hold the tap/stop button near your looper while opening your amp again). After doing this, it will be very easy to engage and disengage looper. Keep your A pedal in unlatched mode, since if it is in latch mode it will not only stop the loop, but delete it as well, acting as if you're pressing and holding the tap/stop button on the amp; whereas if you keep it in unlatched, it will stop the loop if you just press it, and remove the loop if you hold it. With this setting on your pedal and your Cube XL amp, and a good guitar and a wah pedal of your preference, you just can't go wrong. You will be all set for rockin' out. Also, note that I only reviewed this item for use with a Cube amp, whereas this is an all-purpose item which you probably can use with hundreds of other items, such as keyboards, other amps, processors, etc. And the absence of a power adapter is unnecessary as the battery is only used for powering up the LED lights which you won't really need. I didn't try it without the battery but I read it in a comment in reply to another comment above on this page. Quote: "Now, with regards to the battery - it is only used to power the LED Indicator...! It is not necessary, or required for foot switch operation. As such it lasts a very long time."

Es un BOSS estándar. Está muy bien construido y funciona perfecto. Es compatible con cualquier equipo que utilice el protocolo estándar para pedal doble o sencillo ya que trae conector TRS y dos conectores TS, son dos Pedales en uno. No es barato pero soso tiene la calidad de la marca.

This is a very good, versatile double guitar amplifier switch. Ideal if, for example, one has a Roland JC-40 (as I do). Yes, they're not cheap (I have two), but they are very high quality and allow me to easily switch the amplifier's built-in reverb, distortion and chorus functions. PS The only slight downside is that these switches require a PP9 type battery, i.e. there is no facility to connect to a pedal power supply. It's fixable, but a bit of a fiddly nuisance.