Electriduct Cable Shield Floor Cord Cover CSX-2 PVC Wire Protector 58 Inch - Black

This cable shield is of excellent quality with a slide open and close design. It was easy to mount the cable inside and slide to close it at the same time. There are two sticky strips on the flat side of the cable shield. It is a simple matter of peeling off the top non sticky layer and pressing the shield down onto the floor. At the moment I've decided just to peel one of the strips to see if it keeps the cable shield attached to the floor, as the cable shield runs across the floor to the the wall from behind my couch and as there isn't as much foot traffic in that area. It a nice solidly constructed shield cover and it blends very well with the rest of my floors. I would absolutely buy this again.

I bought a few of these Electriduct Cable Shield Cord Covers nearly 5 years ago, to manage various stereo-speaker and Ethernet cables that I had running crossing various doorways / entranceways -- on either side of the doorways, I was usually able to secure the cables discreetly against the bottom edge of the walls and/or through the walls or under carpets, etc... But the doorway openings proved challenging, and I didn't want to run extra cables all the way up, over, and around the doorframes... So instead I just routed the cords through these cable shields at each doorway where the cables otherwise would've been exposed these entrance paths (and inevitably the cables would've either been damaged by people walking on them and/or would've tripped people -- plus a tangle of exposed cables would've haven't looked nice at all).... Anyway, my initial impression was that these cable shields did their job just fine -- they were easy to cut to size, and the cords I had routed through them easily enough, and they did the trick of making everything look organized and stay relatively protected... On the other hand, they also seemed a bit pricey for what were really pretty simple flat-tubes of rubbery plastic... It would've been nice if longer lengths or more pieces were provided, and/or if they had an improved felt or silicon lining on the bottom that made them less likely to move around on smooth floors (there is also a two-sided tape option to secure them in place, but there were a couple of spots where I wanted to maintain the flexibility of being able to move them around without having to tear up tape every time -- but it would've been nice if they weren't quite so slidy)... However, I'm upping my rating to five stars because I've now had these cord covers in place in my house across multiple spots for nearly 5 years -- and despite being stepped on and kicked around a thousand times, including by pets and kids -- they still look nearly as good as new. They've never cracked or ripped, the cords they're protecting are all still in great shape, and no one's ever been tripped up by them... So I gotta compliment this product for not only doing it's basic job, but also holding up for the long-haul!

If you get "Wood Grain" expect it to be two very different shades, as the picture shows. The picture where it all looks consistent is not the one that is real. All in all, it's easy to take apart with a little force (as you would want), and it hides one "real" extension cord, such as this one Fellowes 9-Foot Heavy Duty Indoor Extension Cord - 99595 , quite well. It has sticky strips on the bottom, but to avoid ruining the floor, we just elected to make it one large trip hazard instead of a cable which can get looped over a foot when walking. The smaller ones aren't designed to hide 300 cables, if you're thinking you're buying a raised floor cable management system you're in the wrong area. Does it's job, looks pretty dang good for plastic, and was as advertised.

I ordered the CX2 in wood grain and I'm impressed with the quality of this product. The wood grain looks good and the material is tough. It looks like it can stand up to some pretty heavy pressure. I did see another review that had a picture where the wood grain had rubbed off due to heavy traffic. Only time will tell. If that happens to me I will update this review. This one's a no brainer but I recommend not being an idiot like me and assuming it will be the correct length by eyeballing it. Like I said this thing is tough so if it's too long and needs to be cut I don't think a pair of scissors will do the trick. You'll probably need a power tool or a hand saw. There are two adhesive strips on the back which is nice so I didn't have to glue it down or buy double sided tape. Pros: +Quality material Cons: -Pricey for the length of material Overall this is a quality product. I think it's a little pricey so I'd use it in select locations that are in plain view and buy the cheaper stuff for low traffic areas that are out of sight.

Decent product. Looks much nicer than standard white or off-white cable management cases. I'm taking a star off for cost (seems a bit pricey for what you get, though that's purely my opinion and could be wrong). I'm also taking a star off because the real-life colors don't even come close to matching the pictures. I ordered the "cherry wood" color, but what I was sent looks exactly like their "wood grain" color. This happened with both he original item, *and* the replacement I ordered. Fwiw, when you look at the label, it actually says "Cherry Wood" on it...though it's clearly *not* cherry wood. I kept both pieces, because I did have areas where wood grain worked "okay". And after my second attempt to actually get something that looked like cherry, I gave up. Long story short: I think it's a nice, four-star quality product, if you get what you order...a three-star product if you're set on cherry but are sent wood (or vice versa...never tried ordering 'wood grain'...maybe they'd have sent me cherry?).

I was able to hide a coax cable, thin power cord for a 19" tv, and a flat AV cable with the yellow, red, white ends in this CSX-2 Cable Shield Cover. It was easy to cut to size with a box cutter by continually scoring the plastic. The piece snapped off in a clean cut once the score was deep enough. I needed the cover in a tight corner which made it impossible to slide the cover back on the track. Snapping it into place does not work well at all, which to me is a good thing in that you know the cover wont be popping off any time soon. However I needed a rubber mallet to pop the cover onto the track. (And that was in a location that had only the coax cable by itself. Therefore it was not the amount of cables inside, rather the quality of the plastic cover snapping into place keeping it from easily snapping on) The section with the three wires was in a location where I could simply slide the cover back on the track with no issues. So keep this in mind if you are working in tight corners like I was. The adhesive on the back of the track worked very well. No issues there at all. And the faux wood sticker finish was very nice and blended well with my light wood grain paneling. I would definitely recommend.

Got this to cover power cord for our Lazy Boy recliners. Perfect size and the cord fit great. Rigid enough to lay flat even if you don't use the adhesive backing. Looks pretty good, also.

This product for lack of better words "sucks" , I'll keep this simple: Reasons 1-3 1. The 2x adhesive on the back are not strong enough to stick to a Wall, with out falling off. 2. Attaching the top peice back onto the bottom... It not only is a fuss aligning the slots together but sliding the top peice to secure is a struggle all in its self... On top of that... Best of luck removing the peice with out damaging the aliment (now if you don't pop it off, you will than have 1/2 secured. Wires...bravo... This is where your money went..... 😑 3. Packaging... Nothing was secure...recieved the package, opened the box... And out fall the 2 peices, wrapped by a peice of paper.... I removed the top peice from one end and literally struggled for about 3-4 minutes trying to muscle the top peice off...when it was removed (slid off finally) this item was already damaged (hence the struggle to remove top and bottom peice) * see photo attached...

Purchased the CSX-2 wood grain. Great product, adhesive is strong enough for the cover to stay attached to floor. I currently have two LAN cables and a phone line going through it - could probably fit 4-5 LAN cables through it. One thing to note is that there are two rubber lips on either side of the cover which are slightly different colour than the wood grain pattern, so don't expect it to be a perfect match. I will say that the wood grain pattern is pretty good. Don't know about other colours. Hope this helps.

The package came on time and it was well secured. It was easy to install and the materials they used feels very strong. I have it installed in my living room floor and it matches my flooring well. The cord fit in perfectly and hides it very well. I would definitely recommend this product.

This was a high quality product that blends very well with the flooring.

It does the job just fine but it looks more dingy than the photo. The faux-wood finish looks sickly brown with a touch of green to it, not a bright or clear wooden color. The images here are much better looking than the actual product, and it looks quite cheap.

It matched perfect with the old wood floors..