100 Pack of Rok Hardware #8 x 1" Coarse Deep Thread Truss Head Drawer Front Adjustment Phillips Screws

Good screws. My main concern from reading reviews was that they would come in at 1 1/4". They were dead on 1", so no problem. I used them to install drawer fronts. Pre-drilled with a 5/16" bit as product description suggested which allowed for a little play when adjusting the fronts. Drawer fronts were 3/4" and boxes were 1/2". Length worked out well.

The over sized screw head allows you to drill an over sized hole in drawer box front allowing you precisely line up drawer fronts on your cabinets.

Pretty solid has yet to have any issues. Work fine in wood however be aware that there are like 4 threads per inch which doesn't always work super hot. That being said I'll buy more when I need them

As a professional cabinet installer I find these screws worthless, reason being they don't " stick" to my magnetic Phillips bit. There is so much " filler" in the metal the screw just falls off of the bit. These suck!

As advertised

1" screws were 1 1/4". If you intend to use to attach 3/4" drawer fronts to 1/2" drawer boxes you'll be disappointed to see a hole in the face of your drawer. Measure before you use! Bag claimed screws were 8 x 1 (not 8 x 1 1/4).

Screws sent to me, from Amazon, are 1-1/4" under the head and are not useable. Package is marked #8 X 1". Minimal threads-total of five full threads, seems low for a screw with 1-1/4" shank under the head.

I got these screws to attached 3/4 inch oak drawer fronts to drawer boxes made of 1/2 inch plywood. The large washer/head allows a hole larger than the screw to be drilled to allow more wiggle room if needed for small adjustments.