TechOrbits Rolling Desk for Laptop - Standing or Sitting Mobile Computer Cart with Wheels, Adjustable Height & 27.5-inch Surface - Portable Home Office Workstation - Black

So I work from home and wanted a desk that would allow me to go mobile out onto the front or back porch, or even just to the living room. I needed it to accomodate a docking station for my laptop, two monitors, a keyboard, and a mouse. Because I still wanted to sit while I worked, and the chairs we have outside are a little lower than a regular desk chair, I found that the desk mount arm for 2 monitors I bought made the monitors too high when mounted on the top shelf, so I removed the top shelf and mounted the monitors to the second lower shelf. Then I had no shelf for the keyboard so I bought and mounted an under-desk keyboard tray to that shelf and used the little bottom-most shelf for my laptop and docking station. I zip-tied a multiple outlet extension cord onto the frame so I can plug in the docking station and both monitors and plug the whole works in with the extension cord. It works perfectly! It's heavy enough to be sturdy and strong, but not so heavy I can't get it across the threshold and onto the back porch myself to work outside. I'm a genius!!

Arrived when promised. Packaged well. Easy to put together. Very sturdy. The instructions had all the parts labeled but the boards were not labeled. Easy enough to figure it out which one went where. Tools provided with the hardware package. It is a little tricky adjust the height especially if you already loaded the desk tops with monitors and other items. The desk has to be raised all the way to the upper limit to come back down to a lower level. Very satisfied with my purchase. It’s the size I needed to accommodate a small work space and still have room on it for a laptop, monitor, keyboard and mouse pad, scanner, and a few office supplies. Small enough to move through standard doorways (but just barely) so that is an added convenience.

I've had it about a week and it's a sturdy desk. The high adjustment works well. Just remember when you want to lower it you have to pull it all the way up and then it will slide down. As you begin lifting it up to your preferred height, it will click at each level and lock in place until you lift it again. Once you've reached you desired height there are 2 knobs to screw into the holes for extra protection to keep it from sliding down although it is locked in place. More on the locking in place. It's like tent or pop-up shelters when you extend the height and it locks into place at each height except the legs are not wobbly like a pop-up shelter or tent. The legs (entire structure) are made of a pretty thick metal. The wheel casters are decent. There are only wheel locks on the front. You can put them on the back if you want but I prefer the front to help keep it from sliding forward. The wheel casters will slide on a desk floor mat and not stop. But if you are on a hard floor, the wheels I have in the front do have rubber on them to help prevent sliding. I put the back wheels on the mat and the wheels with rubber on them that lock in front on the hard flood to grip the floor. I noticed the way the base that the wheels connect to are flat and sturdy enough if you don't want to use the wheels. It was made to be portable and can be raised to be a stand up workstation if you want that height.I do recommend getting edge protector for the shelves edges especially if you have kids or just don't want to get clipped by the edges. I've attached a picture of the edge protectors I got from Amazon also. The nice part is the adjustable heights. You can use just about any chair. Maybe your favorite chair (informercial) lol. I always say if it doesn't work out I have 30 days to return. Oh. Be very care with the package of screws. The are separated in a blister pack and numbered/lettered. If they get mixed it's hard to sort some of them out (I learned the hard way). There was one screw that didn't match the number/letter. Mine was for the center shelf. So don't freak out it's the right screw. Easy assembly. 30 min maybe. Don't over tighten with the allen wrench (included). Some parts I found easier to install by turning it upside-down rather than trying to install. Trying to put the screws with an allen wrench from underneath is a bit challenging. I'm happy with so far. Again I suggest edge protectors especially when your retrieving something from the shelves below. It does have room for a printer not an extremely large one though. My all-one printer is 21 in long and won't fit between the bars on the shelf.... I gave it a 4 star because the mislabeled screw that spent time trying to figure out by eyeballing and measuring the screws one by one. About only 4 sizes though.

I searched far and wide to find a new desk better suited to my new (Covid induced) work from home situation. I needed a desk that had:* Small footprint - doesn't take a lot of space* Holds my laptop and a widescreen monitor side by side for dual monitor working* a keyboard tray* high enough for a 6' tall person to use standing with good postureThis desk exceeded my expectations. It is taller than most of the other standing desks I found on Amazon, so it can reach a good ergonomic height -- my monitor is at eye level when standing. Sitting it perfect too. Some may find the lowest sitting position too high for them, but I have a good task chair and the height is perfect for me.I also find that it's quite easy to move from standing to sitting, while it does take some strength, it's very stable and I go in-between positions several times a day without needing to remove anything from the desk except perhaps a glass of water.