Anti slip Coating for Baths and Showers – Roller Included, Easy Application – Tub Grip by Slip Doctors transparent non slip formula increases traction on fiberglass and acrylic tubs, showers and trays

My wife slipped over in our corner shower cubicle and hurt herself quite badly we can't use a matt as the cubicle is of the low profile type with a central quick drainage drain and it would overflow so I thought I would try this anti slip coating it was so easy to apply and looks fine it is difficult to wipe clean as it is a rough surface so I just rinse it with clean water from the shower and leave it to dry it does at first feel a bit strange on your feet but you soon get use to it and no more slipping the grip is just so good it makes you feel so safe its been some 6 months now since it was applied and so far no sign of any degradation but even if I had to reapply every year it would be worthwhile.From one very satisfied customer.

The media could not be loaded. We have a full length shower tray, I was always concerned about slipping. We considered purchasing the sticky strips, but I thought they would come unstuck after a time. I looked at a similar product to this one on one of the popular plumb sites, but at near £90 I was dubious.This product arrived, I read the instructions and followed them, cleaned using white spirit, and luckily we had wet and dry paper in the shed (it would be helpful if this product came with a small sheet, not every one has the wet and dry ), I gave the tray a light rub with the wet and dry, wiped over again with the white spirit, the bottle is small, again thinking will this cover? It did, I kept a little over too, just incase I missed an area. I let it dry the from 4pm until the morning. It is Brilliant, I felt so much safer. It is very soft underfoot. The product has been down over 1 week, I checked the area, I can see absolutely no reason this will lift or peel. Preparation is key. This product is a definite great purchase highly recommend.

This product works. It provides a good anti-slip coating that is easy to apply and works. Problem arises with cleaning as the rough surface created makes it difficult to remove hairs; you need a hose to clean the shower tray. A small downside if you want a non-slip surface

Prepped bath exactly how it said to on the packet. Left time in-between 1st and 2nd coat. Left for over 24 hours. My partner had a bath and upon inspection after the bath, the coating has come away in a section, leaving it looking absolutely ridiculous. I assume that if you use it on a bath, you cannot use the bath for it's purpose and can only take showers? The size of the bottle and roller is ridiculously small and would only be suitable for a small bath. Terrible quality and a real waste of money.

I am always very wary about slipping in the bath or shower as breaking your leg when naked is not ideal. I cleaned our new shower bath just with normal cleaner, I was worried about using too abrasive cleaner, it was a new bath after all. The roller brush supplied is easy to use and the bottle was sufficient to cover the whole of the base of our large P shaped bath. It has been 4 months since I applied this and it is still working brilliantly. Feels like soft sand under your feet and no slipping. Would highly recommend to all ages.

I'm now confident to stand on one soapy foot in the bath without fear of immanent injury. Sort of a slightly bumpy finish that you do notice if you lie in the bath and wriggle about, but not horrible. A must for showering without fear of slipping though. Do use the little sponge roller that comes with it as that helps to create the correct texture.[Edit: After a year it discoloured, now 21 months after applying it it is starting to flake off]

An excellent product. We previously had non slip circular pads on our shower tray which were fine but had become horribly discoloured. Thought I would give Tub Grip a try. I watched the video before starting and noted that the base had to be cleaned thoroughly before applying the product. The pads left an adhesive residue when I peeled them off so I used white spirit to remove this. I then used "Barkeepers Friend" to clean the base thoroughly. Having rinsed and dried the base I applied the product evenly over the tray and then spread it out using the roller. I left it to dry for 12 hours but it actually felt touch dry within a couple of hours. The shower tray has now been transformed with a lovely clean non slip base. It feels like fine sand under your feet. I would definitely recommend this product and have no reservations in giving it 5 stars.

Item arrived very quickly and was surprised as to how little coating is supplied for the cost. However,I was willing to apply to my shower tray as it is very slippery when wet.On reading the instructions supplied I was surprised that prior to applying the product the surface of the tray should be lightly sanded. I was very unwilling to this as it would ruin an expensive tray if the product had to be removed for whatever reason. So reluctantly, I sent it back for refund.