Thermal Grizzly Minus Pad 8-120x20x1.0mm 2-Pack Thermal Interface Pad, Electrically Non-Conductive, High Thermal Conductivity & Compressibility for SSDs, GPUs & Electronics

Amazing quality! Used it for my Lenovo Legion gaming laptop to replace some of the thermal pads / putty! Worked really well and dropped temps by like 10-20°!! (Either that or it was because I cleaned the fans, which weren't that full of dust)

I am computer/electronics literate but certainly no expert. I purchased the Thermal Grizzly interface pads for mounting heatsinks on the 5 x Western Digital 4Tb SSDs installed in my QNAP NAS (TBS-h574TX-i5-16G-US). They were straightforward to install and have worked effectively controlling the operating temperatures of the 5 SSDs. I estimate, using before and after measurements, the combination of the Thermal Grizzly pads and the QNAP heatsinks reduce the operating temperatures of the SSDs by ~8-10 degrees Celcius. I would recommend them for any NAS application assuming they fit the space available around the drives.

Great stuff overall. Very easy to cut to size and apply. Saw substantial temperature improvement when applied on a 3060 12GB used in a local AI application. In addition to overall thermal performance, acoustic levels dropped substantially due to lower temperatures.Overall a great upgrade for the price and appears to be something that will make a lasting improvement.

We’re good quality pads. However I bought from two different shops on here one were fake and the other were real. If you advertise it’s an actual brand from a company people make sure it’s re actual brand.

These thermal grizzly pads are awesome - high performers. They are more expensive for the size though so I bought this 120x20x1mm to apply to the high heat areas like the VRAM on the baseplate. I paired these grizzlys with a cheaper 1mm alternative with a lot more surface area to work with for the less sensitive areas and the backplate (the blue stuff in the image). The combo worked like a dream. These pads don't deform or elongate at all when removing the film, unlike the other brand I was using (AIYANNI). This made it really easy to apply and stay in place (and cut to precise rectangular areas) and just sticky enough! As far as the orientation, I would recommend FLAT side down on components and rough side upward because this will make it easier to remove baseplate in the future without tearing off pads since they will have a better adhesion to the PCB components.When it was all said and done, my card was 20 degrees C cooler!! This was at both resting and full-load. If anybody was worried about the different size of pads on this specific card, fret no more! 1mm is perfect for all areas! Just be sure to carefully cut and apply to the correct areas and components, and you're set!

I reposted my laptop and these work just as intended. Knowing what size and depth is a must when repasting, so please keep that in mind.Packaging was okay, I can see how easily the paste strips can get messed up inside the packaging on delivery.

These pads reduce the temps on your NVMEs. They are very sticky and IMO hard to install because they stick to themselves very easily, and once they do you might as well throw them away. So, taking your time - unlike the "normal" blue type - they are a great addition to a rig, especially if you're an ardent gamer. Are they worth the inflated price? That is a call for each person. If you are a stickler for your SSD temps and money is not the #1 issue - go for it! I summarize what we tell our clients when we build them a custom computer. If you are using Gen5 NVMe's and going to go all out with your gaming - yes, you need them. If you are a casual gamer, you might want to spend the extra on some better fans and use standard thermal pads.

Great product