Thermal Grizzly Minus Pad 8-120x20x1.0mm 2-Pack Thermal Interface Pad, Electrically Non-Conductive, High Thermal Conductivity & Compressibility for SSDs, GPUs & Electronics

These thermal grizzly pads are awesome - high performers. They are more expensive for the size though so I bought this 120x20x1mm to apply to the high heat areas like the VRAM on the baseplate. I paired these grizzlys with a cheaper 1mm alternative with a lot more surface area to work with for the less sensitive areas and the backplate (the blue stuff in the image). The combo worked like a dream. These pads don't deform or elongate at all when removing the film, unlike the other brand I was using (AIYANNI). This made it really easy to apply and stay in place (and cut to precise rectangular areas) and just sticky enough! As far as the orientation, I would recommend FLAT side down on components and rough side upward because this will make it easier to remove baseplate in the future without tearing off pads since they will have a better adhesion to the PCB components.When it was all said and done, my card was 20 degrees C cooler!! This was at both resting and full-load. If anybody was worried about the different size of pads on this specific card, fret no more! 1mm is perfect for all areas! Just be sure to carefully cut and apply to the correct areas and components, and you're set!

Thermal grizzly thermal pads have been my go-to for a very long time now. While I don't care for their paste, I find that their thermal pads are very high quality and they transfer heat very well. I like to use these pads specifically for applying heatsinks to my SSDs. I know that once they get on there that they will get the job done. I have used many of these over the years and I have yet to come across the need to have to replace them. They are about a 8/10 on performance, there are better pads out there but they are very expensive. With these you get what you pay for and it's a good mix or price, performance, and thickness rebound. You can't go wrong.

Very easy to trim it works very well on the PS4 Ram I have noises a slight temperature drop

My first time using these pads, you gotta be really delicate when cutting as you only get two strips. They are thick enough for replacing other pads on the ps4. They fit well. Worth the price, still have 1 strip left. Got the hang of cutting it now so it's easy to use. Quality, so they will last till next visit to ps4.

These are good they got the job done but I have had better

Decided to replace thermal pads during a fan adjustment in my PS4... as the fan blades were slightly hitting a metal plate a year after replacing the original... probably because of all the grabbing, handling, and moving around of my console.I also replaced the thermal grease on the APU. My Playstation 4 runs so much cooler and quiet now. The original thermal pads installed by Sony cover only 50% of the 16 surrounding memory chips. This package has enough to cover each chip when cut to the size of each chip... with a little bit left over. These pads stick well to each chip during assembly too.My fan no longer hits max rpm during gaming as it did before replacing the thermal pads, and thermal paste.

This product is amazing & will be my continued go-to for thermal pads. Installation was simple and significantly improved the noise level of my fans operation. For anyone wondering, I paired these thermal pads with Corsair's Thermal Paste.

These pads reduce the temps on your NVMEs. They are very sticky and IMO hard to install because they stick to themselves very easily, and once they do you might as well throw them away. So, taking your time - unlike the "normal" blue type - they are a great addition to a rig, especially if you're an ardent gamer. Are they worth the inflated price? That is a call for each person. If you are a stickler for your SSD temps and money is not the #1 issue - go for it! I summarize what we tell our clients when we build them a custom computer. If you are using Gen5 NVMe's and going to go all out with your gaming - yes, you need them. If you are a casual gamer, you might want to spend the extra on some better fans and use standard thermal pads.