30-2130-100 (100 PSIG, 1/8"NPT) Replacement Pressure Sensor 12 Month Warranty

Changed my review from 5 stars to one,I purchased this to monitor fuel pressure. Worked great until after warranty is out, typical. it starting to read about 5-8 PSI off at random times, I am an Instrumentation Tech so yes it is connected correctly and compared to a calibrated gauge for comparison after suspicion it was off. Help window time frame is closed, how convenient, wholsale sensor says the warranty is now 12 months, was 18 that tells you dont expect it to make it much past 12 months

Used this to replace some Chinese sensors that weren't calibrated correctly for temperature. These read error when I first plugged them in on the holley terminator. I unpinned the connector and swapped power and ground. Took no more than 5m and it's reading much better than the Chinese sensor it replaced. In heavy traffic the temperature doesn't effect it like it did the cheaper one and I have reliable fuel pressure readings.

Used the 100psig for coolant pressure. The first time on the dyno the sensor failed and read MAX voltage. I should have bought a AEM stainless body sensor but wanted to give them a try just in case they did work.

the power and ground wires are swapped in the harness I got. See image for pinouti.e. red is ground, black is 5v.Appears to still work when wired correctly, hopefully I didn't damage it

This sensor has a 1/4" NPT thread not a 1/8" NPT like the description says.However 1/4" is what I needed anyway, so I don't need to use an adapter!

Use it for pool and well water pressure recording. easy to install. Combined it with old Ubiquiti mFi mPort for the recording.

I don’t know if it works due to the fact that it’s the wrong sensor and didn’t have a harness . I’ve returned this product and will order a competitors sensor.