Jokari 6 Count Pepsi Heritage Logo Soda Can Pump and Pour, Red/White/Blue

These are a replacement for the original Jokari caps I bought a few years ago. Although I really didn't want a cap with the Pepsi brand on it, the plain ones were significantly more expensive, so we went ahead with these. They work great. You take the open cap and snap the bottom split ring on the rim of a soda can, push the cap down until you hear an affirmative click, then repeatedly press the soft top until you feel resistance. After a few tries you'll get it down, and will be thrilled that a partial can of soda will retain its fizz for days. We buy cans of tonic water to make cocktails, and since we get three servings from one can, we would be left with a third of a can, which we hated throwing away. Since they are made of plastic, they do eventually break -- either the ring will crack, or the pump part won't fully snap down anymore -- but for a few bucks, I can't really complain. These totally earn all five stars.

Day 1: Opened a 10-oz. can of tonic water, poured about 3 oz. into a glass, and sealed the can with this product (using 3 or 4 pumps).Day 2: Opened the same can, and there was quite a pressure pop when I opened it. Poured about 3 oz. into a glass, and the carbonation was just as fizzy as when I first opened the can. Then I then sealed the can again (about 4 oz. remaining) with this product (again, 3 or 4 pumps).Day 3: Opened the same can, and there was another strong pressure pop. Poured the remaining tonic into a glass, and it was STILL just as fizzy as when I first opened the can.If you're looking for a soda can lid that REALLY keeps the carbonation in, this product is perfect. No more wasted tonic water for me, and I like using cans better than plastic bottles since they're better for recycling.

The Vacu Vin works very well. Saves a lot of beer. Only problem is that after 4 to 6 months it breaks at the hinge. I've used these before and that is about the average life.

These things are amazing. The rubber that holds in the pressure is high quality. The plastic is strong. & never had any issues with it but I could see if not placed properly it may crack. They are a bit expensive so that’s why I put the value low. But I would buy them again. It really holds in the carbonation. The trick is to click it. Some people close it but not hard enough to close “click” the latch. Once that happens it is sealed. And when you open it later it goes “boom” from all the held pressure. I’ve opened a can, put this on it and came back the next day to have full carbonation.

The first one broke after 2 months, the ring snapped at the hinge. The second one is still working but, I doubt it will work much longer. The soda can pump did work well, till it broke.

They work great initially but then they broke. Used less than 10 times. The latch that locks down broke, so it won't seal and keep the fizz in. Contacted company twice and have heard nothing! Don't buy!

If you're like me and don't always finish your can of carbonated beverage, you hate to see it go flat in the fridge. These babies are the answer since you seal them and then pump up the pressure inside the can. Only problem is they're cheaply made and break after about 6 months use.

The Pepsi soda can lid and pump are much better than I expected. They easily attach to the can and seal well. Pressurize the can with the build in pump to keep the carbonation from escaping. So much better than a snap-on lid which does not pressurize the can.

Me sorprendió que cumple totalmente con la descripción de este producto y me llegó antes de la fecha señalada.

I use this product fairly often. It takes a little bit of getting use to in regard to knowing when the air has been removed and making sure the lid is securely fastened to create a vacuum.

Don't bother. It worked really well to keep the fizz in for 24 hrs or more but after a couple months of very gentle use it just fell apart. The plastic just degraded and broke. The idea is great but not worth 30 bucks for 2. I would buy again if they used more durable materials but right now is a waste of money. Very disappointed.

Me gusto que puede uno dejar varios dias en el refrigerador y se sigue conservando el gas de la pepsi. buen producto

Worked as planned, except for the surprise yucky rubber taste when I took a sip after having this thing on the can for a day in the fridge. Returned it.