2-4 Gauge Wire Connectors, 175A Battery Quick Connect Disconnect 12V-36V Powerpole for Car Bike ATV Winches Lifts Motors More Grey 2 Pcs

nice, look very durable, connecting is easy

I used these to make quick connects for a 9500 pound winch on my truck. I have it set up to be removable and wanted to use it on the front or rear hitch mount. This set was fairly easy to install if you have an average shop setup. I crimped 4 gauge wire into them and then soldered the connections to insure durability. You will need a vise to crimp the connectors as they are pretty stiff but were not damaged by heating them to add solder. I did have a little trouble getting the connectors to push far enough into the plastic housing to clip into place, especially after crimping the wire which made them wider. I had to use a little silicon spray to get them to push in far enough to stay in place. The connection between the two units seem to be solid and I did not have any loss of voltage when I put a meter on them. They hold solid but will come apart with a normal amount of effort. I will see how they hold up but my first impression is favorable and winch works using these connections.

Absolutely great but these are not meant to connect with the Anderson branded product.

Makes it easier to get change out batteries on my bulldozer. Set up the charger so all I have to do is plug in works great.

Good quality and muuuuuuuch cheaper than buying them at a local auto parts store. I use them in sub zero temperatures with no problems. They also come with the nice cover that the auto parts store ones do not have!

I love these Anderson connectors. It makes it super simple to remove my amplifier on top of my custom sub box. I have a beauty panel covering it all and it takes up a lot of the trunk on my 22 540i and the battery is in the rear. So I have to have easy access to the back. The build quality of these connectors are really nice and hold up well. It is super easy and fast to remove my amplifier.

They work perfectly and really good quality for my winch and jumper cables

First box I received was missing 1 of the crimping lugs, but Amazon very quickly sent a new one that had everything included.The connectors just barely fit typical 6awg wire, so if you use heatshrink it is going to be super tight and somewhat difficult to snap the lugs into place. Once you do get them snapped, they are definitely not coming out on accident!The added holes to mount to surfaces is a great touch as well.