SchluterSystems KST1220/1830 Kerdi Center Outlet Shower Tray 48"x72"

This is a fine shower base. The entire schluter line seems to be very high quality and very functional. This was relatively easy to cut and fit in my shower area. I appreciate that it has the slope built in. I didn't want to guess and try to get that right with dry pack mortar. Worked well with the rest of my schluter stuff also.

Made a ruff project easy. Used other Schluter products for our shower stall project, and they all worked great. Definitely happy with them.

This worked great for my walk in shower. Easy to cut and fit... The most important thing is to make sure your drain hole and the hole of the pan match perfectly. If you mess up or have a gap at your edge do not worry! you can pack it in with mortar then place membrane on top of it that overlaps an inch of the shower pan, just remember your 1/4 inch per foot slope.Below are the steps I took but before that I wanted to answer some questions you may have but you cannot find answers to (yet) on the internetDo you need to use the Schluter foam for the walls or their foam barrier? No this works as a regular shower pan, I do recommend buying the same brand drain kit... Others will work but their brand is comparably priced, fits perfect, and it comes with Schluter brand membrane covers for the drain and for your faucets.For the walls and barrier: I decided to save some money and just do the walls framed with treated 2x4's cover the frame with mold proof backerboard (1/4 inch) covered them with the mesh membrane (cheaper to buy from Amazon) using liquid membrane from Home Depot to adhere the mesh membrane to the BackerboardFor the shower pan:1. I dry fit and cut the pan2. Added a layer of mortar to adhere the pan to my baseboard using the recommended trowel and pressed the pan into my baseboard3. filled in my edge gaps with mortar then added a membrane on the newly added mortar to overlap an inch over the pan. (liquid membrane as the glue then added mesh membrane on top.)4. Tiled my bedpan, when I got to the drain, used the foam template given to fit it, then packed mud under the drain and pressed it in so I had a proper fit, then tiled under it while the mortar was still setting under the drain so I could adjust the drain based off the tile.I hope this helps someone!

Was very skeptical about a foam shower pan. Decided I'd go ahead and try it just for timing reasons and to do a quick shower install. The foam is a lot more dense and definitely more solid than I was expecting it to be. You'll definitely want a perfectly level floor to install it.

The Idea is there however after floor was leveled and this shower slope was installed there was a low point on one side of the pan. Had to pull it up and replace it with bedding mortar.

Worked fine, we liked that it had the slope built in BUT this item only comes with the floor, it is not a kit so don’t let the “good price” fool you. We spent another $200+ for the needed supplies

Worth the money!!!

Buying these online is probably a bad idea. Mine was lightly dinged during shipping, though it didn't impact effectiveness.