Boat Engine 3JE-03200-0 3JE032000 3JE032000M Carburetor Assy for Tohatsu & for Nissan 4-stroke 6HP MFS6C NFS6C Outboard Motor

I watched a video (Youtube) about how the 3.5 carb, that by the way comes in a lot of other manufacturers as well, is horrible and this 6hp was literally a swap over carb part. Fit perfectly. I mean perfect. I had several issues with the OEM carb on the 3.5. Mostly stalling when you turn the throttle, bogging, just a horrible carb. Swapped this 6hp in place and booom. Started right up. No bogging, stalling, nothing. Smooth through the accelerator. If you have a 3.5 Mercury, Mariner, Tohatsu, or almost any other one that is a 3.5... this is the best thing you can do bar none. Swap it out!

I replaced carb on my Tohatsu 6hp (MFS 6C). Started immediately, had to adjust for proper idle rpm.The motor has very few hours, and I've now cleaned the other carb well, but in the summer heat - I didn't want to install the old carb and possibly still need to replace...Careful with the bolt sleeves that nest in the Tohatsu air intake - mounts to this carb part. The sleeves are loose fit to the plastic air intake.

Before purchase, I asked if the carb was correct for my model and the seller quickly responded and confirmed that it was. I received it quickly and it was well packaged and appeared well made and functionally identical to the original Keihin carb I was replacing. I installed it and it worked flawlessly without need of adjustment. I ran the engine for an hour today at various speeds and it runs and idles better than it ever has. My engine is a 2011 Tohatsu 6hp Sailpro model MFS6C 3JE. I use the engine on a Cape Dory 22, a full displacement, full keel 3200 lb sailboat with a top speed of about 6kts. The engine easily pushes it to hull speed at about a third throttle. As nearly as I can tell in my application, this carb is functionally identical to the original one.

Fired up on u first pull

I was sold a used carb. The dealer I had install it had to open it up as motor would not start. The interior of the carb was completely gummed up. $200 dollars down the drain in repair costs.

bolted on and started right up

Bolted right on

Small sailboat engine stopped working because of ethanol in gasoline. Ethanol free gas was unavailable. We had been at sea almost 30 days and were motoring home through a waterway when our engine stopped. After being stuck; cleaning and trying to repair the engine for over 4 days we bought this new carburator on Amazon. It worked perfectly! Was easy to install. We were on our way in minutes. This part saved our trip and got us home safely. A true lifesaver. Worth every penny.