chenyang PS3 Hard Disk SATA 7Pin Male to ESATA 7Pin Female Extender Extension Cable 50cm

The media could not be loaded.  As long as you have the correct port, these will work beautifully. Powers a full size 5.25in disc drive even under heavy load. Also works with 3.5in drives. They DO NOT plug into regular eSATA ports. You need an eSATAp port for this to work. Overall I’m very happy I found this product and would buy again.

Sturdy cable allows for quick and stable file transfers, helped me back up all my data with ease.

Works great thank you .

When I used USB adapters to plug into my older Lenovo laptop, I would only get USB 2.0 speeds. This was rarely above 30MB/s read/write. With this adapter, I was able to see over 100MB/s read/writes, since I was able to use the esata interface on the laptop.I recommend a barrel plug to Molex adapter to go with this, as opposed to using a power supply or wiring your own. The one I bought was called "CRJ Female DC Power Supply Plug to 12V Molex Power Adapter Cable", and it was inexpensive.

5 stars for 2.5in drivers. 2 stars for 3.5in drivers, but it can work.Thanks to one of the reviewers, I was aware that the molex connector already got 5V from the eSATAp connector. I have connected to my laptop eSATAp and actually measured 5V on the red (+5V) / black (GND) wire pair.One can ONLY connect 12V [to the other pair: yellow (+12V)/black] in order to drive a 3.5in HD. 2.5in drivers only need the 5V already present from the eSATAp port.I am going to just cutoff the red wire (and insulate it) because it is not needed and will cause trouble if an external 5V source is accidentally connected (one reviewer lost a 3.5in HD).If your eSATAp port is from a desktop (which I don’t have), I suggest you connect the adapter and measure the voltages on the red and yellow wires. 5V will probably be there, the 12V may or may not be.And, by the way, the 4-pin “molex” type connector is of low quality, as pointed out by many reviewers. If you have to use it, I suggest to carefully plan and connect it only once. I am using a better quality female/male molex adapter with mine, and do not intend to ever remove it.Finally: for the price, it is a good value. It worked without any issues with my 1TB, 2.5in HD. I have not tried yet with a 3.5in drive, but it should work, if one takes care of the issues discussed above.

I really appreciate being able to transfer data without having to use an external enclosure at double the price. It worked well transferring data from my old hybrid drive to an SSD on my Dell Studio XPS 1645 laptop. It plugged into the USB/eSATA port easily and the drives were recognized correctly when booting up. Do not plug into or remove from the port while the laptop or PC is running to avoid damaging the hdd, sshd or ssd. I intend to use this with other drives for temporary/external use.

Tried a couple of different PC's eSATA ports, none of them worked. Enabled eSATA in the BIOS still nothing. Hard to know where the problem is when the known good devices are not responsive. I guess its the cable, but could be the eSATA ports. Tried using good SSD's, so ????

After getting this cable connected it worked well. Setup was a problem as the 12v connector was a major pain. The pins are extremely sloppy and refused to line up with the computer's connector. After about 10 minutes of fussing with it, it finally lined up and then worked well.

Es bastante comodo no necesita alimentación extra y en general puede resultarte muy útil si necesitas trabajar con muchos discos duros.

Tiene la longitud adecuada y material que se ve resistente.

Inserito e ha funzionato al primo colpo. Robusto e funzionale.

permet de connecter un SSD sur un des ports eSATA d'un Asustor :)reçu et tester ce jour , le SSD est vue comme "périphérique externe" et permet un débit entre les HDD internes et le SSD externe de 130 Mo/sc, largement supérieur a l'USB 2

It works