United Pacific 31459 ULTRALIT High Power LED 7-inch Round Headlight w/Turn Signal & White Position Light Bar, Solid State Design, DOT/SAE - 1 Unit

Great upgrade to Classic cars.May require inner bucket modifications to fit

I have purchased many United Pacific lighting products over the years. In this instance, I was looking for a headlight with a "bright enough" integral yellow turn signal and this light has it. The car I built is a "smoothie look" and I wanted to eliminate any extra holes for lights, etc.The basic headlight provides a white light with great night time visibility. Only the top half of the light illuminates on low beam. High beam is the full light with both halves lit, again great lighting at night.The center "position" light has two functions, first as a low intensity DRL (Daylight Running Light). The second circuit provides a turn signal brighter light visible in full sunlight.There were no wiring instructions in the box or on the website, so here they are:On the main (black) three-prong plug - standard headlight protocol:Black = groundRed = low beamWhite = high beamSecondary Plugs (banana plugs):DRL/Headlight Position Yellow - If the two red plugs are connected, then the yellow "position" low intensity portion of the yellow center bar is lit when the headlights are turned on.DRL Only - Only the red "banana" end is is connected to a continuous hot when the ignition is turned on. This provides a low intensity DRL ONLY.TURN SIGNAL ONLY - connect the turn signal hot to the white "banana" plug. This will deliver a high intensity yellow turn signal ONLY when the flasher is activated.Just to be sure, test and verify the circuits with a steady 12 volt source before installation.

I should have read it word for word. ONLY ONE headlamp in the package.

installed on my 65 mustang gt.What i missed is it is ONE per package.Had to order a second.