Air Intake Turbo Tube, Turbochagrer Intake Pipe Hose for Mercedes-Benz W172 SLK200 SLK250, W204 C180 C200 C250, W212 E200 E250 E250 M271 Engine, 2710901629 2710901729 2710902029 2711801819 2710901929

This fit well on our 2013 c250. It’s a great alternative to replacing the entire hose assembly that MBZ wants to charge hundreds for! Approximately a 10 minute replacement with a razor knife, flat blade screwdriver, and standard pliers.To remove the old- I removed the center section of hose, and then sliced the two remaining ends with a razor blade. They are friction fit on to the existing barbed nipple. Then pry lightly with a flat blade screwdriver.For install- First, Slide both hose clamps towards the center of the hose. Install the lower section first so you can manipulate your pliers while you slide the lower hose clamp into place. Then slip the upper hose onto the horizontal nipple and slide the clamp into place.Then your done!

This product is a money saver. Good quality & much better than OEM part. 10/10 recommended if your C250 needs repair on the Air Intake Hose

Fit like a glove unlike other replacements out there. A little pesky to install bc of the location, but it’s done.

Very well constructed & fits perfectly to my 2012 MB C250!

Hopefully the clamps aren't too tight for the plastic/polymer OEM parts that the tube attaches to. A pretty quick install. The main issue was getting all of the stock tube off of both ends using a box cutter and pliers.

just what the doctor needed. they get hard over time and needs to be replaced

Better than expected

Dealership wanted $940 to replace the entire front intake hose. Got this and replaced in 5 minutes. Only feedback is that it’s a bit too long, so I needed to cut off about .5” or so to make it not fold up and fit better.