Will a cell phone charger (12V DC output, 300mA (that is 0.3 Amps) work if I splice it to these lights? Or is that too little amperage?

Hi, its kind of funny, but all those years of saving those chargers, sure glad I did, what I do, is check the output voltage of the charger, ( don't exceed 12 volts DC) to save money I cut off the connection end, and connect the 2 wires to the LED strip, if it doesn't work, just switch the wires they are funny with the polarity, plug it in to test it, ( polarity test) if you get light your all set, I then just solder the wires and heat shrink the connections, guess there is a reason I saved all those chargers, and everyone one I have used worked great, it doesn't have to be 12 volts either, I have used 6,8, and even 5 volts DC output and they worked, of course the closer to 12 volts the brighter the lights, I do it this way to save money, if you buy chargers, connectors etc they will nickel and dime you to death, any other questions feel free to ask away, I did buy a dimmer switch and have connected 3 strips to it the dimmer was cheap 5 bucks, im not cheap but always looking to save a few bucks and they do add up, I have acutally used an old printer power supply for a power source as well, it keeps all this stuff out of landfills and saves you money at the same time, oh one more thing the heat shrink tubing can actually be "shrunk" using a hair dryer or even a cigarette lighter, if you don't have a heat gun, and the heat shrink is very reasonable, as you have noticed I get long winded, but I enjoy helping folks and try to save them money at the same time

forgive my dumbness but we want to put these on our camper awning and wish to know how to engerize them? Direct wire into the DC supply?

The DC supply is 13.2 volts (if you hook to the battery direct). I would hook to something that is 12 volts and you know it. Use 16-18 gauge wire. 13.2V will shorten the life of the product. (Yes - it's an old question, but I answer for those that might have the same question later).

Can I connect additional strips for a longer stretch?

You absolutely can connect multiple strips together. You can use something like this http://www.amazon.com/dp/B006BF6RT6 if you do not want to solder.If you plan on putting these lights outdoor, you should absolutely leverage your landscape lights if you have them. Its way easier and cheaper than to use the standard 120V transformer. Your landscape transformer outputs 12V AC. You need 12V DC for the LED. I recommend you get one of these to get the conversion done. It is a very small device so makes it easier to hide. 1/3 the cost of buying the transformers and a timer to control it (or worst, trying to find an outlet for the transformer). You can get it from Amazon. http://www.amazon.com/dp/B00SGMW4K8 A demo is here: https://www.youtube.com/watch?v=OJzarYlOnPc?

getting these to light up my sons jersey frame- would i be able to have 4 cut strips with 4 connectors connecting each corner of the frame?

My 8 year old son wanted our house to be the brightest on the block. I cut the LEDs into 9 sections. We had 828 lights. The power draw was 3.8 amps @ 13.8 volts. It worked fine.

Brand	Nilight
Color	4PCS USB Interior Lights
Form Factor	Strip
Auto Part Position	Inner
Included Components	4PCS 48 LEDs USB Interior Lights
Material	Acrylonitrile Butadiene Styrene (ABS)
Water Resistance Level	Waterproof
Remote Control Included?	Yes
Number of Pieces	1
Light Source Length	0.79 Feet
EU Spare Part Availability Duration	2 Years
Automotive Fit Type	Universal Fit
Manufacturer	Nilight
UPC	781621092987
Model	TR-12
Item Weight	10.2 ounces
Package Dimensions	11.26 x 4.31 x 1.85 inches
Item model number	TR-12
Exterior	Painted
Manufacturer Part Number	TR-12

Nilight 48 LEDs DC 5V Multicolor Music Car Strip Light Under Dash Lighting Kit with Sound Active Function and Wireless Remote Control, 2 Years Warranty, 4PCS USB Interior Lights

Details

Description

Specifications

Have a Question? See What Others Asked

Common Questions