ShareGoo Aluminum Steering Knuckle Hub Mount Upgrade 102010 102011 102012 Part Compatible with HSP Redcat Racing Lightning Volcano EPX Monster 1/10 RC Model Car Truck, Blue

These parts fit perfectly on my redcat volcano

No hay palabras para definir hermoso y muy fuerte durará toda la vida muy funcional lo mejor gracias

Pros:Looks greatGood included hardwareCons:Steering knuckle and carrier have too much toleranceSuspension connection points are not exact to OEM and suspension needs retunedThe products look very quality and most of the machining is precise. The bearings fit tight on 3 of the 4 hubs. The one loose bearing was the outer bearing on a rear hub but is held in by the wheel being mounted so not an issue (added a drop of blue Loctite to ensure it stays put). The suspension link points look to be the same as OEM, but are off a little bit and so I needed to retune my tow and camber. This is not a big deal and expected whenever replacing suspension components anyway, but would be nice if they were closer to matching OEM.Half star knocked off because the steering knuckle does not fit tightly into the hub carrier. I tried using the OEM and included spacer pieces and ended up the same where the hub could move up and down at least 1mm when fully mounted. I remedied this using shims. I confirmed a couple times the hub carriers were not bent causing the gap.Half star knocked off because the screws I received were 2 Phillips and 2 hex heads instead of all 4 being one or the other. The Redcat Volcano uses Phillips and is what is pictured. I have the hex head tools already, but as a beginner type RC, ensuring all hardware matched OEM would be nice. I also received 2 extra set screws, which I guess is nice to have spares.I have not yet torture tested these and will update the review if I have any durability issues. After getting them all mounted, and suspension aligned properly, I did some quick runs up and down the street, and the steering tracking under partial and mashing full throttle is much better than the plastic OEM. I then removed all screws that went into the aluminum and added a drop of blue Loctite before tightening them up and I am letting that cure before bashing (One screw was lost on my test drive but I have other spares).

Looked great just was wrong size I have a nitro rustler going to return now thank you though.

Was fairly easy to install, everything fit together like it was supposed to. Great price And fast shipping.

I wanted to reduce slop in my suspension for my Redcat Lightning EPX Drift. The pieces that hinge on the front A-Arms are too thick, causing the entire front end to 'stick' in whatever position you push it in. I tried filing the A-Arms but the aluminum is just way too thick for filing. I am HOPING that an aluminum front A-Arm set will resolve the problem. Otherwise I will be returning these.

When I received this item everything was great except the barring they sent did not match the set I got very disappointed

when screwing metal screws into metal, use some locktite to prevent the screws from coming out.