[2 Pack] Flashlight Holder, Mount Bicycle Mounting Bracket Flashlight Holder Torch Clip 360º Rotation

Bike lights are expensive so I bought this and a bright flashlight instead for half the cost, its easy to install and after a few weeks this is still going strong, I do notice that no matter how tight I place it around the handle bar of my bike i can still crank it little, but to my surprise it’s never moved on its own during a bike ride.

Nice and cheap.Do hold single cell 18650 and 26550 flashlights to the fork of my bike with only simple modifications for the latter. Plastic inner shims kinda stiff and difficult to click into place, helps to warm them up a bit and apply a non petroleum based lubricant (I used refined cocoa butter, worked like a charm.) Can be ratcheted on the fly in ~ 8° intervals to direct a flashlights beam to the desired angle of attack. Quick release levers kinda fiddly and metal hardware seems to be chrome plated steel which rusts a bit with prolonged exposure to the elements.Update: For use with single-cell 26650 flashlights, recommended to open the channel-locks all the way and switch out the thick default click-lock shims with the single pair of thinner ones you’ll find loose in the box. These lack prongs to hold themselves in place when the clamps are opened, so my advice is to line with 3M VHB™️ double stick tape, trimmed to fit as shown in pic. The 3M sticks a lot better to its own plastic backing and to your fingers than it does to the shims so is a real PITA to work with but still worth the effort for the amount of frustration it will save you in the long run. Bonus, thickness and compressibility of the tape increases spring in the clamps when tightened around a flashlight, making the QR levers a lot easier to operate. If you’ve already lost the spare shims though or need better grip and compression around your flashlight, another alternative is to cut your own from 3M Electronics Self-Stick Rubber Anti-Skid Pads — marketed here on Amazon under the brand name ROOS. Their resilient composition, super sticky adhesive backing and grippy siliconized surface lend them ideally to this purpose. Just slice into strips 3/4” (20mm) wide and cut tabs/notches to match the interior halves of the clamps, peel off backings then press into place (see pic.) Easy-peasy.Do wish a similar mounting bracket were available in aluminum alloy with siliconized rubber shims, would gladly have paid triple the cost here for a higher quality device. Still, not bad for the price, especially with above mentioned mod.

Great buy. Easy install- accepts different size lights

Purchased to use in a larger flashlight, beyond the window to return.

Strong, quality, flexible mounts. Would recommend.

Interesting product.Wellmade, easily adjustable.Not visibly elegant.I use a tube light that fits all my bikes (Garmin gps mount), except the MTB. This product solves the MTB problem.

What follows is the mistake that was hidden, then discovered at the second order of these clamps arrived yesterday. When pressing in the sleeve cushions, it was noticed the slotted hinge point with 3 positions for alternate size needed. One needs to align hinge pin to slide select next option, and position chosen stays locked. Quite Clever I must say, and glad I ordered an extra set, badly needed for wire rack spot light now mounted to its 1" corner posts.---------------------------------------------Previous message:These are Great Clamps, and more compact than expected. Some members having issues with inserts falling out simply didn't get them in place correctly.As Stated in Specs:Adjustable clip size, suitable for body diameter from 0.7 to 1.5 inch.Suitable for holding most LED flashlights with the body diameter from 18mm to 38mm.Not Quite - I was hoping it would fit stem size of 1-3/8 - 35mm.Not w/o modifying with a little Dremel action on clamp to let clevis lever get seated in place then Lever flipped to lock in place. Maybe if forced with water pump pliers, but possible damage risk.Mounting clamp on slightly smaller 34mm section of handlebar mount. No inserts used, and Lever screw just made it into pivot nut. If tube is 35mm, lever screw would not reach pivot nut.Mounting Highend LED flashlight with Tele zoom Spot to Flood was perfect, with 1.0 inch body.* Make sure inserts are mounted and pressed in correctly, or they will obviously fall out.The inserts have location tabs that get pressed into place within the clamp. The tabs on back side of inserts are specific size to only go one way into clamps recessed pockets.The clamp needs to be opened fully to insert them correctly.At 18mm - 3/4" to 34mm its fine. Those skilled with Dremel can modify where needed if tube is slightly larger than 34mm.Glad I ordered twin set, so gal next door got a clamp mounted as well.For sure a another set is needed to mount other items.

One broke while installing it