NZXTH9 Elite CM-H91EW-01 Dual-Chamber ATX Mid-Tower PC Gaming Case Includes 3 x 120mm F120 RGB Duo Fans with Controller Glass Front, Top & Side Panels 360mm Radiator Support White

These cases look fantastic and are a pleasure to build in. There is so much space in the rear compartment that cable routing is an absolute doddle! Air flow is great - my CPU and GPU temps stay much lower than any other case I've ever used. The only negative point is that the HP Flow comes with four none RGB fans included.i can't imagine why anyone would build a PC in this case and not use RGB fans, so the first thing you do is remove them so they can be replaced with something a little more colourful. This means I now have 12 of these fans hanging around (I've bought 3 of these cases so far). Surely the case could be offered a little cheaper if there was an option to buy it without any fans included. That's my only gripe. The build quality is top-notch! Everything fits perfectly, and personally, I think this is the best looking case on the market - even nicer than its main rival, the Lian Li 011 Dynamic, as there are no frames at the front corner where the glass panels meet. It also accepts 120,240,280 and 360mm radiators in the top.

The media could not be loaded. Beautiful case, very good build quality. Fantastic airflow (side fans were installed in exaust position so check them as per your preference - installed my 3rd party ones as intake).Brilliant cable management and super easy to install everything.Plenty of room for large graphics cards - im using AMD 7900xtx Merc 310 XFX edition with plenty of room and around 2inches clearance for PCIe power cables between the GPU and the side of the case.If you have one of the larger NVIDIA 4090s simply check the height/depth of your card against the case measurements to make sure the GPU power cables have clearance.Fantadtic cooling and great noise suppression.Note though that, due to the design, where the front and side glass panels meet their is a tiny, tiny gap which will allow for air in/out depending on your fan configuration but it is minimal and not really an issue

Great case, have been debating on buying this case for a while now and I’m glad I did!Easy install and plenty of room to move components and upgrade.Cable management is excellent because you end up with a lot of cables just from the fans alone.Great airflow too cpu sits idle at 31-32 Celsius 45-50 at high loads.Visually stunning aswell! Great work NZXT!

Having come from low end cases this case was a pleasure to build my new system in! There's plenty of space behind the motherboard to hide, route, and organise your cables. The case feels extremely well put together and isn't flimsy in anyway. The tempered glass does make the case extremely heavy but I don't really see this as an issue as I'm not carrying it round with me.

Really.nicd spacius case, loads of breathing room for everything, brought for my partner as she HD a smaller case and her fans would sound like a rocket taking off, this one is nice and silent. Ease of clean ing seems really easy as everything pops off. Assemblt was quick too

Patience is not always one of my virtues, I'm prone to spontaneous purchases. I try to take my time to look around and plan accordingly, buying a case is no exception.I have been using a Caselabs STH10 for the past 5 years and after a few years wondered why I bought it in the first place. Despite having tons of build space it's very bulky and over-kill for my needs.This is where the H9 Flow comes in.I love simple box type cases. I'm not really taken by the tempered glass fad or RGB fans but despite this this case ticked all the other boxes. I found it tricky to source answers to my questions regarding clearance measurements, even NZXT have ignore my emails (2 weeks and counting).Anyway, now onto the details...As mentioned above, many case manufactures are very vague about details when it comes to radiator mounting options beyond the size support. 120 , 240, 360 etc.For the record, I was able to easily fit 2 EK P360Ms which are 4.4cm thick, one in the top and bottom, without modifying the case and both with a push/pull fan config.This was achieved due to the fact both support 14cm fans and the extra mounting rail allowed me to move the rad across thus giving me more motherboard room and access to the headers.The only downside doing this means only one side of the rads is secured. This wont affect the bottom but the top rad can be given support from the top slot triple side mounted fan bracket.The included fans feel cheep and just awful flimsy plastic. One of mine even had a slightly annoying clicking sound. I would recommend replacing these ASAP.Coming from someone of high expectations and picky in general, I have found the quality of today's cases far better than that of 5 years ago and the H9 Flow has surpassed my expectations and lives up to it's reputation. It really is a great case with plenty of air flow.My specs aren't the best but it works for me this case handles temperatures better than my former using 2 x BlackIce SR2 480 MP rads.9900KF - Basic Overclock @ 4.5GHz 1.16v (Watercooled)Z390 Ace64GB DDR4 3200MHzMSI 3080 Trio Z (Watercooled)My re-build is still in the works, around 90% complete but I hope the pictures help explain some of the rambling above.EDITI have been able to fit the last fan on the upper radiators lower side and like before, without modifying the case. I came up with several possible methods and settled on one that allows me to easily access the side fan section should I need to in the future.