Carbon Fiber Sheet & Epoxy Resin Kit (36" x 14" + 16oz of Epoxy) 2x2 Twill, 3K, 5.7 oz. - Carbon Fiber Fabric, Carbon Fiber Repair Kit, Kit de Lámina de Fibra de Carbono y Resina Epoxi

For people who say that it does not work or that the resin is bad, it is because they are doing something wrong, do not get carried away by those criticisms if you do things well, it works wonders, just find out what you should do before buying it. that depends on the result you will get, I definitely recommend it. I leave some photos of the pieces that I am making, (they are not finished yet)

For a beginner set if you’re just getting your feet wet and have never worked with carbon fiber this is a great product. It’s easy to use, it’s straightforward, and the results speak for themselves.

The CF and epoxy worked well for my repairs of various damaged CF sporting equipment (bike frame, kayak paddle shaft). The epoxy should be mixed 1:1 by volume. Without an easy way to measure small volumes, it is convenient to mix small batches of epoxy by weight using a small kitchen scale however I noticed that the resin is considerably denser than the hardener so the volume will be wrong if you mix 1:1 by weight. I estimated that the resin is about 20% more dense than the hardener so using a weight ratio of 1.2:1 Resin:Hardener works well to keep the volumes equal. Curing of the mixed epoxy is fairly slow at room temperature. If you are in a hurry, heat the wet assembly well above normal room temperature to speed up the curing reaction rate. Small heater, close lightbulb, or putting the part into a hot furnace mechanical room (100F) all can be used if you don't want to wait for days.I had no troubles with premature gelling of the epoxy as reported by others, satisfied with the product.Weave of the CF sheet is fairly loose so be aware of material fraying if weave appearance is a concern.

The kit arrived quickly and is very good, this is the first time I have ever used carbon fiber and it turned out nicely. The instructions that it came with weren’t very helpful besides Resin ratios but I recommend watching YouTube videos.

The epoxy included is utter garbage! Followed the included directions which stated 1 to 1 by volume, the reaction was so extreme it melted the plastic cup I used the the epoxy hardened up way too fast. Don't buy this kit!

easy to use no smell works very good ,

I bought this kit I definitely recommend it to anybody who wants to do some diy carbon fiber parts very awesomeBut how I can buy a gallon of it ?

It works, but the weave of the carbon is much looser than Gorilla Carbon and other kits that I have used to repair other broken bicycle frames. The loose weave makes it tougher to get a good wrap without having loose strands or distortion of the weave spacing. The 1-1 epoxy/hardener mix did not provide the fast stick to allow each layer to stick to the previous layer. I had the most success when holding the wrap together with my gloved hands, then getting good compression with packing tape to leave it to cure.I'll use this kit again for simple wraps, but it's worth it to get something better if you are doing more precise work.