Matter Over WiFi Led Strip Light Controller RGBCW Smart Led Driver Support Smarthings Alexa Google Apple Home App Control(RGBCW)

Added some kitchen cabinets and wanted a good way to manage led lights on them. Took a chance with this controller and so far so good.Connected to HomeKit right away and able to control the lights, brightness and color.

I had high hopes for this device, but it has a major flaw that I think makes this device unusable for most people: If the device loses power or even drops from the network for a moment, when the device reconnects it ALWAYS turns on the light.Power outages aren't very frequent, but network blips are, which means every day or two, the light just comes on on its own. If you use this controller for bedroom lights, for example, you'll be awoken frequently by lights.In Home Assistant, you can set the "power-on behavior." However, the switch does not respect the setting, instead always reverting to "on". In fact, the controller will change the power-on behavior back to "Previous" after an outage, which is annoying on its own, but even that setting is not respected and it always behaves as if the setting is "on." I've been testing this controller for weeks attempting to solve this problem to no avail.The companion iOS app is garbage -- filled with misspellings and the app would never download the control panel for the switch.Finally, I wrote Zemismart and outlined the problem and they replied immediately basically telling me that the behavior was on purpose. The language was a little hard to understand, but when I wrote back with more info, they ghosted me.So, I highly recommend going with a different switch that allows you to set "power-on behavior" and respects the setting. You do not need a home filled with lights that come on unexpectedly every time there's a blip in your network. Trust me. You'll regret buying this controller.

Does what it is supposed to do and works well! Had to reset a few times while setting up (not a big deal), but reset instructions were not correct (LED was supposed to blink after holding a button for a period of time. LED never goes into blinking mode, but reset happens anyway).

Great lights easy to manual

It took me like 15 tries to get it to connect to apple HomeKit but once it was connected it's worked perfectly. It also would be nice if it had mounting screw holes but I used 3M Dual Lock to mount it and that worked great in case I need to take it on or off again.Also once it's connected to HomeKit it does seem to take about 10 mins for it to fully integrate before working smoothly so just give it a little bit of time, it might be updating or something...

Defective, will not reset so I can pair to my system. Other one I bought had been fine. There is no link to get support from seller

This in combination with the suggested power supply made wiring my floating shelves very simple. It works great with 6 wire lights so you can control the temperature of your white leds in your power strip. Very good value for what you get considering its compatibility with Apple HomeKit. It just requires that you have a hub like an Apple TV and IPv6 enabled on your local network and you can just scan the box and manage the lights with all your other smart lights.

First one didn’t work at all. Second one won’t connect either. Feels crappy and cheap. Unfortunate that there are no alternative right now. This company won’t last long once a viable alternative comes available.