YITAHOME 67" Tall Bar Wine Cooler for Liquor and Glasses, Farmhouse Storage Cabinet w/Wine Rack, Open Storage Shelves, Buffet Kitchen Cabinet with Wooden Doors for Living Room, Living Room, Grey Wash

I am 110% pleased with this cabinet in terms of value for the money. It perfectly fits the space and looks amazing next to my wine fridge (NOT INCLUDED.) You’ll have to buy your own copy of Wine Folly, as well. If you’re considering this cabinet for your home, read on!DELIVERY: This product arrives knocked down (like IKEA) and is very well packaged inside the shipping box. My Amazon driver did an excellent job delivering this to my front porch. IKEA charges extra for delivery, but Prime includes delivery!THE BOX: The box is designed to open up completely flat, so make sure the tape is at the top when you lay the box down, and ensure the build space is adequate to completely open the cardboard carton since you’ll want to build the cabinet on the box. Have a large trash bag for the styrofoam and expanded foam sheeting, as these products are not recyclable most places. Bag these as you unpack the carton to reduce the amount of cleaning you’ll do when you’re done.LABELING: Each piece has a sticker to help identify it. These pieces correspond to the I structure manual. The hardware is in a smaller corrugated box inside the carton, and each type of hardware is individually packaged and labeled, as well. My kit had more than enough of every fastener needed to build the cabinet.INSTRUCTIONS: These were almost as good as IKEA. Since I have built more than my fair share of IKEA, I sat down and read all the instructions first (GASP!) because the fastest way to prolong an IKEA build is to miss a step or to assemble something backwards. The instructions do NOT mention the need to tighten the cam locks. I’ve built a ton of this type of furniture and knew to do that, but it’s possible that others who were not satisfied with these cabinets or thought they were weak or wobbly didn’t know that you must use a Phillips head screwdriver to tighten the cam locks in a clockwise direction until they stop. This tightens each joint and yields a very stable cabinet.TIPS: At each step, I carefully matched the orientation of the piece with the instructions, which made it easier to avoid any mishaps. I also installed the top surface onto the base cabinet before installing the cam screws on the top side. This makes the installation more stable and avoids damaging the bottom cam screws while trying to install the top ones. I also installed the cabinet doors and shelf before attaching the hutch. Lastly, I put the base in place and adjusted the feet to ensure it was level and did not rock before pulling it back out and installing the hutch. This made the cabinet lighter and easier to tilt up and adjust the feet.DIMENSIONS: All holes were drilled correctly. The base cabinet holes for the adjustable shelf could have been a little deeper. There are three shelves on the hutch, including the space on top of the base. The interior width of the hutch is 24-3/8” and the depth is 9-3/8”; the top shelf is 11-3/4” high and the wine glass rack reduces this space by 1-1/2”; the second shelf is 9-3/4” high; the bottom shelf is 13” high and the top of the base cabinet is 15” deep in available space. The base cabinet top shelf is permanently installed and is also 24-3/8” wide x 14-11/16” deep x 8-3/4” high. The second shelf has three height options that are 2-1/2” apart. Mine is on the middle set of holes, with 8-3/8” high second and bottom shelves. Adjust these clearances by 2-1/2” if you want a different height. Finally, if you choose to place the adjustable shelf in the bottom of the cabinet to store taller items, you’d have 16-3/4” of clearance.The total cabinet exterior dimensions are 26-7/8” wide x 15-3/4” deep x 67-7/16” tall including the adjustable feet.FINALLY: This was a very easy project for an experienced builder. A novice builder might struggle with the level of detail in the instructions, but the tips above should help.

Update: the 2nd one was a pain in the a$$ to assemble!!! I followed the directions just like I did for the first one. I didn't try to go off memory or anything like that. Ended up having to take it apart halfway through and start over cause it didn't make sense. Finally realized they gave me the wrong parts. They were labeled correctly as far as the numbers go, but they didn't fit. So the 2nd order had extra parts, missing parts, and mislabeled parts. What a headache. I ended up having to get creative to finish it. The outside looks good, but the inside is missing a shelf and has a shelf that's too big so the door doesn't close smoothly like the first one. It's not noticeable really. If I had assembled the 2nd one first, I probably would've returned them. If you buy this, pray you get one with all the correct parts.Perfect color, looks just like the pic. I'm 5'7 and it's a little taller than me if that helps you. I ordered 2 so they'd be ends to a wine/bar cabinet. I just finished putting this one together and I'm not gonna lie...it was a hassle trying to combine the top and bottom parts once assembled. Not the fault of the product, I just didn't screw the screws down far enough. So honestly it was easy to put together although it is time consuming because there's soooo many screws. I'm gonna assemble the 2nd one now. Hopefully it'll be easier since I know what to expect. It also comes with everything you need to assemble it, including a screw driver. I'd recommend this product.

It was so much nicer than my expectations, the color was exactly what I expected. Assembly instructions were easy to follow (it took about 2 hours to assemble) the doors have a gap but not a big deal to me. Shipping was on time, actually a day early and it was packaged very well! So overall I’m very pleased with this product.

Beautiful piece for my new coffee nook. Was determined to get the pot, cups, and all equipment off the counter. We put ours right beside our water dispenser. Very sturdy and not hard to put together. We are not using the wine glass holder because we simply don’t drink wine, so I can’t speak about that. Plenty of room in the upper shelves for the coffee mugs, and down below for the kuerig box and the “to go” travel mugs.Looks really nice!

This cabinet looks nice when assembled. I comes with a lot of pieces and parts, and is daunting when you open the large shipping box. The 15 step instructions are pretty good with lots of pictures to make assembly fairly easy. The storage capacity is surprisingly large in the bottom section. I really liked that. The top section is recessed, so the usable space is a lot more limited. If you are looking to store bottles in the top section, this cabinet is not for you. You can't fit bottles up there at all. It does look good though. Some of the pre drilled holes aren't deep enough, and it can be an absolute beast to screw in the tiny screws for the door hinge hardware. This is a super cabinet once assembled, and I like it a lot.

I have not gotten the assembly booklet. I am stuck without that information.Please help

Before, I've gotten things like this that are missing pieces, lacking comprehensive instructions and/or just suck once you've put them together. Happy to say this does not check ANY of those boxes. All the pieces were there, well packaged - even extras of some of the more important ones. The instructions were very detailed pictures with labels of what went where. Just make sure you pay attention to what way everything faces before you have to pull it all apart and start again! And now that it is together, it sits pretty in my kitchen, holding and showing some of my most useful and/or favorite items. And it doesn't wobble or look/feel like it will fall apart at a strong breeze. It really is well built and sturdily put together. I do recommend an electric screwdriver for most of it as it will make things go a little bit faster.