🔌 Power Up Your Peace of Mind!
The Victron Energy BatteryProtect 48-Volt 100 amp is a cutting-edge device designed to safeguard your battery from damage by disconnecting non-essential loads before depletion. With a maximum continuous load of 100 amps and a peak of 250 amps, it features an auto-ranging voltage detection and a user-friendly 7-segment display for easy adjustments. Ideal for professionals seeking reliability and safety in their energy management solutions.
| Manufacturer | Victron Energy |
| Brand | Victron Energy |
| Product Dimensions | 6.2 x 12 x 12.3 cm; 800 g |
| Item model number | BPR048100400 |
| Manufacturer part number | BPR048100400 |
| Amperage | 100 Amps |
| Voltage | 12 Volts |
| Item Weight | 800 g |
M**E
Get one of these if you care about your leasure battery
Although pricey. Anyone looking at this product will know letting leasure batteries run flat below 50% is damaging the battery .This voltage sensing relay is perfect for van conversions. Easy to fit and set up. The bonus feature that i did not know it had was the connection for a kill switch. This is a handy feature to save your leasure battery when the van is not being used for a long period. Simply connect to small gauge wires to the controller up to a panel switch. And this will isolate everything in one go. There is also a connection for a buzzer to warn you that the battery is low and will buzz for 30 seconds before dropping the power. Giving you time to grab a torch if need be.
D**B
Victron make top quality kit. Easy to use.
Well made and easy to use.
L**D
Says not to connect direct to inverter
The description says it will handle up to 65A continuous but the instructions warn not to connect the load to an inverter. Instead. I will need to dismantle the inverter to connect it to the on-off switch or faff around by adding a relay. It's not what I expected at all.
M**L
High quality device
High quality. Works great.
M**N
Works but has a hard time charging buffer caps in equipment
It does work, and I am able to control it via the REMOTE input. However, just like Victron's 12/24V Battery protect, their 48V battery protect also has huge problems just charging the capacitors in a small unloaded inverter without thinking there's a short or over-current (when there isn't).In addition, there is significant leakage between the IN and OUT terminals when the device is turned off. So much leakage, in fact, that when the unit is turned off the voltage builds up all the way to the battery voltage and causes the inverter to try to kick-on every few seconds. I had to add a beefy 10 Kohm resistor between the output and ground to get it to stop doing that. Both the 12/24 and the 48V battery protect products have this problem.There is also no mention of whether the device has an external diode in it or not for dealing with voltage spikes from inductive loads (that would otherwise destroy the FETs).To be frank, Victron is supposed to be a high-end company. They should fix their products.
C**Y
nothing fancy, just works
instruction is not the best if you are not technical
S**W
Expensive
Awesome device: app works great. Bluetooth short distance.
H**O
Tolles Qualitätsprodukt
Funktioniert problemlos, alles wie beschrieben, einfach zu installieren und parametrieren.Den Stern Abzug gibt es nur dafür, dass man die Schalt-Hysterese nicht individuell einstellen kann.
W**R
Alles ok
Super Gerät
Trustpilot
1 month ago
5 days ago
