(Pack of 4) Universal Integrated Fridge Door Sliders Brackets Kit Installation Fixing Kit and Installation Sliding Mounting Bracket Fixing Kit Attaching to Fridge Doors

Very good product, seems more robust and will last longer then my old ones!

These are considerably better quality than the broken ones that you're replacing for my fridge. There are no screws or instructions provided, so see below for a simple set of instructions and details of what screws are needed.1) It's important to put the end pieces onto the fridge door at the start so that you can align the sliding mechanism precisely.2) Mark up where the edges of the sliders need to be and make sure that your sliders will come out far enough for the door when it is fully closed.3) Mark the first screw hole nearest to the fridge door's edge. To fix these in place I found that flat-headed M4x20 screws were ideal, unfortunately these were not supplied so you'll need to provide your own.4) Once the first screw is in place, use a spirit level to ensure that that the next ones are horizontal otherwise your sliders WILL catch. Put the furthest away screw in next and then the mid-placed screw.5) Once the sliding track is in place, put the slider loosely onto the track and attach it to the fridge door. Ideally your fridge will have come with its own screws for this purpose, otherwise you'll need to provide appropriate machine screws to match your door edges.6) Check everything runs smoothly, then remove the slider from the fridge door-edge and place the covers provided onto the sliding track.7) Re-attach the slider and put oh the screw covers for the slider itself.

Just what I wanted fits perfect

Got the parts I needed for the job but was unaware that it did not come with fixing screws so a little disappointed in that but to my faults I just looked at pics and did not read description of offer so now have to try and find screws that fit

How can you call it a fixing kit if you get no screws!!!Also no instructions.

Used this kit to replace some broken fixings in our kitchen, ideal as replacement but if fitting new I would buy a kit with supplied screws as they seem to be around the same price.Minutes to swap over assuming you already have screws you can reuse!Seems to be standard size the sliders work fine with the old fridge fittings which does make life easier!

Fab. I managed to sort the fridge door out myself without needing to call a handy person to do it. To make them run a bit smoother I used a little spray of wd40 as they made quite a creaky squeaky noise when fitted. They work great. Very pleased.

No fixing screws supplied in this kit.