2 Oz - BLI101- Aerosol Black Laser Ink for Metals Marking with CO2/Fiber/YAG- Brilliance

2 Oz - BLI101- Aerosol Black Laser Ink for Metals Marking with CO2/Fiber/YAG- Brilliance

Q: Will this work with xtool D1? 10W

You will need the IR laser module in order to do metal, but yes this will work. With that having been said you should watch a few videos on your xtool specific to metal not only to see the process but to get some ideas for what they are using (cleanup and all). Have a good one.

Q: will this work with a diode laser with 5.5w output?

Our recommendation is 25 watts minimum for CO2 laser and 10 watts minimum for fiber laser. I encourage you to try out with your laser type and if it doesn’t work reach out to me and I will refund your money in full. And if does work then I will send you another one for Free if you share your settings going forward for other customers. Thank you Grover

Q: Does this work on brass?

It works on some variety/grades of the brass, Brass being good conductor of heat, you may have to slow down the speed at 100% power. But make sure brass doesnt warp, it may happen if the metal is too thin. Also try to put a flat piece of wood which may help to contain the required heat. As its a combination of heat, frequency and wavelength etc. for it to work on metals. Good luck, don't hesitate to contact the manufacturer for their excellent tech support .

Q: I have a 30 watt fiber laser, engraving on stainless steel and tungsten. should i use the same settings i normally use when engraving these metals ?

Please check out our website FAQ page for starting guide line settings for Fiber laser or call our tech support department and someone can help you in details with you application. For quick reference, please see below settings as a starting point. Thank you Fiber Laser: Power =10 Watt Speed = 50 mm/sec Q-Frequency 200-500 (500KHz gives the best result, But some fiber lasers only go up to 200 KHz) Hatch or DPI = 0.1 mm

4.2/5

Product ID: 304365305

Secure Transaction

Details

Brand
BRILLIANCE
Package Information
Tin
Paint Type
Aerosol
Item Volume
2 Fluid Ounces
Manufacturer
Brilliance

🔥Quick drying in minutes, heat gun compatible

🔫Compatible with CO2/Fiber/YAG lasers (10-25W)

⚙️Nano-particle formula for deep metal penetration

Frequently Bought Together

Brilliance Laser Inks 2 Oz Aerosol Black Laser Marking Spray for High Contrast Metal Marks | Permanent and Durable Metals Ink for Fiber, YAG, Diode, and CO2 Laser Engraver

Brilliance Laser Inks 2 Oz Laser Marking Spray - Copper Tone Red, Permanent High Contrast Metal Engraving Aerosol for Fiber, YAG, Diode, and CO2 Laser Engraver Machine, BLI202

CerMark Ultra Laser Marking Aerosol, 2oz

Description

⚡ Mark metals like a pro — fast, flawless, and future-ready!

LASER POWER PARTNER - Optimized for CO2 (25W+), Fiber/YAG & Diode lasers (10W+), ensuring versatile machine compatibility.
NEXT LEVEL NANO TECH - Cutting-edge nano particles deliver heat-resistant, high-contrast, ultra-durable black marks that last.
FAST FLAWLESS FINISH - Dries in minutes and cleans up effortlessly — perfect for busy pros who demand speed and precision.
SPRAY SMART COVER MORE - Anti-clog tech + 25% more coverage means less refills, more productivity, and zero downtime.
UNIVERSAL METAL MASTERY - Works flawlessly on stainless steel, brass, copper, pewter & more — no metal left behind.

Brilliance’s 2 oz BLI101 aerosol black laser ink is engineered for professional-grade metal marking on uncoated metals including stainless steel, brass, copper, and pewter. Compatible with CO2, Fiber/YAG, and Diode lasers, it features a patented nano-particle formula for deep, heat-resistant, high-contrast marks. The spray offers 25% more coverage with anti-clog technology, quick drying within minutes, and effortless cleanup, making it the ultimate choice for precision laser marking workflows.

Specifications

Brand	BRILLIANCE LASER INKS
Manufacturer	Brilliance Laser Inks
Model number	BLI101MBAS02
Colour	Black
Number of Memory Sticks	1
Item Weight	91 g
Package Dimensions	20.4 x 7.7 x 4.19 cm; 91 g
Item model number	BLI101MBAS02
Are batteries included?	No

Have a Question? See What Others Asked

Will this work with xtool D1? 10W

will this work with a diode laser with 5.5w output?

Does this work on brass?

I have a 30 watt fiber laser, engraving on stainless steel and tungsten. should i use the same settings i normally use when engraving these metals ?

Common Questions

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Ali H.

Fast shipping and excellent packaging. The Leatherman tool feels very premium and sturdy.

1 day ago

Anjali K.

The product quality is outstanding. Exactly what I needed for my work.

1 month ago

View all Trustpilot reviews

Shop Global, Save with Desertcart

Value for Money

Competitive prices on a vast range of products

Shop Globally

Serving millions of shoppers across more than 100 countries

Enhanced Protection

Trusted payment options loved by worldwide shoppers

Customer Assurance

Trusted payment options loved by worldwide shoppers.

Desertcart App

Shop on the go, anytime, anywhere.

₱10264

Duties & taxes incl.

Philippinesstore

Free Shipping

with PRO Membership

Free Returns

30 daysfor PRO membership users

15 dayswithout membership

Secure Transaction

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Yusuf A.

Fantastic experience overall. Will recommend to friends and family.

1 month ago

Farhan Q.

The delivery time was excellent, and the packaging was secure.

2 months ago

View all Trustpilot reviews